Parametric Performance Analysis of 2-GHz Low Noise Amplifier

نویسندگان

  • S. S. Gore
  • G. M. Phade
چکیده

In this paper designed, implemented and simulated LNA is divided into two parts. In the first part, LNA is based on lumped elements and in second part LNA is based on distributed elements. Two designed methods have been compared and best performance is obtained with lumped elements. The designed amplifier provides a noise figure of 0.358 dB , gain of 16.778 dB, input return loss is -4.917dB and output return loss is -10.045 dB. LNA is simulated at 2 GHz by employing active device like MESFET sp_hp_ATF34143_4_19990129. Parametric performance analysis is carried out using Advanced Design Simulation (ADS) tool of Agilent Technologies. This paper highlights or shows the all necessary steps or different performance parameters for LNA design.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Analysis and design of a CMOS current reused cascaded distributed amplifier with optimum noise performance

In this paper, analysis, simulation and design of a distributed amplifier (DA) with 0.13µm CMOS technology in the frequency range of 3-40 GHz is presented. Gain cell is a current reused circuit which is optimum in gain, noise figure, bandwidth and also power dissipation. To improve the noise performance in the frequency range of interest, a T-matching low pass filter LC network which is utilize...

متن کامل

A Concurrent Dual-Band Low Noise Amplifier for GNSS Receivers

In this paper, a new design of concurrent dual-band Low Noise Amplifier (LNA) for multi-band single-channel Global Navigation Satellite System (GNSS) receivers is proposed. This new structure is able to operate concurrently at frequency of 1.2 and 1.57 GHz. Parallel and series resonance parts are employed in the input matching in order to achieve concurrent performance. With respect to used pse...

متن کامل

Design of an S-band Ultra-low-noise Amplifier with Frequency Band Switching Capability

In this paper, an ultra-low-noise amplifier with frequency band switching capability is designed, simulated and fabricated. The two frequency ranges of this amplifier consist of the 2.4 to 2.5 GHz and 3.1 GHz to 3.15 GHz frequency bands. The designed amplifier has a noise figure of less than 1dB, a minimum gain of 23 dB and a VSWR of less than 2 in the whole frequency band. The design process s...

متن کامل

Design and Fabrication of a 9–11 GHz Balanced Low Noise Amplifier Using HJFET

This paper describes the design of an X-band balanced low noise amplifier (LNA) using an available HJFET device. The balanced LNA consists of a pair of electrically similar transistors whose input and output signals are divided or combined by 3 dB two-stage Wilkinson power dividers. The proposed balanced LNA is fabricated and measured. The measured results show that the noise figure is 1.30 dB ...

متن کامل

A New Ultra-Wideband Low Noise Amplifier With Continuous Gain Control

This paper presents a new variable gain low noise amplifier (VG-LNA) for ultra-wideband (UWB) applications. The proposed VG-LNA uses a common-source (CS) with a shunt-shunt active feedback as an input stage to realize input matching and partial noise cancelling. An output stage consists of a gain-boosted CS cascode and a gain control circuit that moves the high resonant frequency to higher freq...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013