Recycler Electron Cooler Diagnostics and Instrumentation
نویسندگان
چکیده
.................................................. PG 2 INTRODUCTION . ........................................... PG 27 BACKGROUND..................................................................... PG 2-7 Pelletron ....................................................................... PG 4 Flying Wire ................................................................... PG 5-6 OBJECTIVE ........................................................................... PG 7 EXPERIMENTAL PROCEDURE ........................ PG 7-9 PID LOOP........................................................................... PG 7 INSTRUMENTATION AMPLIFIER ............................................. PG 8-9 LABVIEW .......................................................................... PG 9 RESULTS ..................................................... PG 10-14 DATA ...... ......................................................................... PG 10-11 ILLUSTRATIONS.................................................................. PG 12-14 DISCUSSION ................................................ PG 15-16 PID LOOP........................................................................... PG 15 INSTRUMENTATION AMPLIFIER ............................................. PG 15-16 LABVIEW .......................................................................... PG 16 CONCLUSIONS .............................................. PG 16 REFERENCES ............................................... PG 17 ACKNOWLEDGMENTS .................................... PG 17 APPENDICES ................................................ PG 18-21
منابع مشابه
Full Discharges In Fermilab’s Electron Cooler
Fermilab’s 4.3 MeV electron cooler is based on an electrostatic accelerator, which generates a DC electron beam in an energy recovery mode. Effective cooling of the antiprotons in the Recycler requires that the beam remains stable for hours. While short beam interruptions do not deteriorate the performance of the Recycler ring, the beam may provoke full discharges in the accelerator, which sign...
متن کاملElectron Cloud Measurements in Fermilab Main Injector and Recycler
This conference paper presents a series of electron cloud measurements in the Fermilab Main Injector and Recycler. A new instability was observed in the Recycler in July 2014 that generates a fast transverse excitation in the first high intensity batch to be injected. Microwave measurements of electron cloud in the Recycler show a corresponding dependence on the batch injection pattern. These e...
متن کاملRaman spectroscopy for medical diagnostics
Raman spectroscopy is based on analysis of inelastically scattered light. This technique has a wide range of uses in chemistry, solid-state physics and other fields. Raman spectroscopy can distinguish between molecules and can identify them by their characteristic spectra. In this seminar I will discuss instrumentation required for Raman spectroscopy in medical applications, followed by specifi...
متن کاملDitanet - an International Network in Beam Diagnostics
Beam diagnostics systems are essential constituents of any particle accelerator; they reveal the properties of a beam and how it behaves in a machine. Without an appropriate set of diagnostic elements, it would simply be impossible to operate any accelerator complex, let alone optimize its performance. Beam diagnostics is also a rich field in which a great variety of physical effects are made u...
متن کاملProspectus for an Electron Cooling System for the Recycler
The Recycler ring was added to the Main Injector (MI) project in 1997 as means to recover the antiprotons remaining at the end of Tevatron stores and to serve as a second stage accumulator to raise the maximum stack current. This report describes an electron cooling system with substantially higher stack capacity than the Recycler stochastic cooling system which could be brought into operation ...
متن کامل