Gain enhancement for wideband end-fire antenna design with artificial material
نویسندگان
چکیده
Gain enhancement wideband end-fire antenna is proposed in this paper. The proposed antenna can achieve gain enhancement by loading novel artificial materials structures (Split-ring Resonators) in the end-fire direction while broad bandwidth is realized by using elliptic dipole elements and a microstrip to coplanar balun. The measurements show that the proposed antenna have around 5-8 dB gain in the working band (5-11 GHz), which is around 2 dB more than the unloaded one. This antenna can be used in target recognition systems for its advantages of end-fire radiation broad bandwidth and high gain.
منابع مشابه
Design of an Ultra-Wideband Monopole Antenna by Using New Nano-Composite Materials
In this paper, a planar monopole antenna is introduced, also we added some new Nano fillers such as Fumed Silica and Aluminum Oxide to RT Duriod5880 and RO3003 to produce new Nano composite materials, then new Nano composite materials are used as a substrate of a ultra-wideband monopole antenna. Antenna characteristics are considered to illustrate that, by using these Nano composite materials, ...
متن کاملA New Compact Ultra-wideband Linear Antenna Array for Target Detection Applications
This paper presents a low-cost compact planar microstrip-fed monopole antenna and its four-element array design for ultra-wideband (UWB) wireless communication and target detection applications, respectively, operating in the frequency span of 3 GHz to 11 GHz. A prototype was fabricated and then measured based on optimal parameters. The results of reflection coefficient (S11) and radiation patt...
متن کاملUltra Wideband Fabric-Based Slot Antenna on Human Body for Medical Application
In this paper a new UWB textile slot antenna has been designed with high precision. This work aimed to makecloser steps towards real wearability by investigating the possibilities of designing wearable UWB antenna wheretextile materials are used for the substrate as well as the conducting parts of the designed antenna. The antenna iscomposed of three textile layers: the top and bottom are condu...
متن کاملDesign and Implementation of a Compact Super-Wideband Printed Antipodal Antenna Using Fractal Elements
A compact printed fractal antipodal bow-tie antenna is designed and implemented to simultaneously cover the operations in the C, X, and Ku-bands. It is demonstrated that by addition of small fractal elements at the sides of hexagonal arms of the bow-tie, a wide operating frequency range of 3.3 to 19.1 GHz can be covered while antenna size is only 30×34×1.2 mm3. In order to match the antenna to ...
متن کاملA Capacitive Fed Microstrip Patch Antenna with Air Gap for Wideband Applications (RESEARCH NOTE)
In this paper a microstrip antenna on a suspended substrate with capacitive feed is presented. capacitive feed is created by a slot within the rectangular patch around the feed point. The proposed antenna exhibits a much higher impedance bandwidth of about 47% (S11 < −10 dB). Effects of key design parameters such as the air gap between the substrate and the ground plane, the gap width between r...
متن کامل