Diamond formation by reduction of carbon dioxide at low temperatures.
نویسندگان
چکیده
This Communication reports a low-temperature diamond synthesis technique, in which diamonds (10-250 mum) can form at a temperature as low as 440 degrees C by reduction of dense CO2 with metallic Na. The X-ray diffraction pattern of a powder sample shows three reflection peaks, indexed with 111, 220, and 311, corresponding unambiguously to cubic diamond. The Raman spectrum of the product exhibits an intense first-order peak at 1332 cm-1, which is the characteristic signature of the cubic diamond, indicating the formation of well-crystallized diamond. Carbon dioxide is a nontoxic low-energy molecule, abundant on earth. This novel reduction method could allow studies of large-size diamond growth using CO2 as the carbon source.
منابع مشابه
THE ACTIVATION OF CARBON DIOXIDE AT A MAGNESIUM (1 00) SURFACE THE ROLE OF OXYGEN TRANSIENTS
X-ray photoelectron and high resolution electron energy loss spectroscopic (XPS-HREELS) studies have shown that the adsorption of carbon dioxide at Mg(100) surfaces at 80K is followed by a dissociative reaction leading to the formation of a metastable surface carbonate above 80K. The formation of a carbonate species is proposed to proceed through oxidation of C0 (g) by an active oxygen su...
متن کاملDiamond formation due to a pH drop during fluid–rock interactions
Diamond formation has typically been attributed to redox reactions during precipitation from fluids or magmas. Either the oxidation of methane or the reduction of carbon dioxide has been suggested, based on simplistic models of deep fluids consisting of mixtures of dissolved neutral gas molecules without consideration of aqueous ions. The role of pH changes associated with water-silicate rock i...
متن کاملرسوب فیلم نازک کربن شبه الماس و کاربین بهروش پلاسمای الکترولیتی کاتدی
By using cathodic plasma electrolysis, a thin film of diamond-like carbon and carbyne was produced on the nickel surface. The ethanolic solution at different concentrations of 15, 30 and 50 vol% was used as the electrolyte; the produced carbon film was studied by using glow discharge optical emission spectroscopy, scanning electron microscopy, optical profilometer, and s...
متن کاملInfluence of shielding gas composition on weld profile in pulsed Nd:YAG laser welding of low carbon steel
Weld area and weld depth/width ratio can be considered to be of the most important geometrical factors in pulsed laser welding. The effects of carbon dioxide and oxygen additions to the argon shielding gas on the weld properties in pulsed laser welding of low carbon steel is investigated. Presence of carbon dioxide and oxygen up to 10 and 15 percent respectively decreases the weld geometrical f...
متن کاملThe Importance of Cannizzaro-Type Reactions during Electrocatalytic Reduction of Carbon Dioxide
A seemingly catalytically inactive electrode, boron-doped diamond (BDD), is found to be active for CO2 and CO reduction to formaldehyde and even methane. At very cathodic potentials, formic acid and methanol are formed as well. However, these products are the result of base-catalyzed Cannizzaro-type disproportionation reactions. A local alkaline environment near the electrode surface, caused by...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Journal of the American Chemical Society
دوره 125 31 شماره
صفحات -
تاریخ انتشار 2003