Phase and amplitude control of a multimode LMA fiber beam by use of digital holography.
نویسندگان
چکیده
Amplitude and phase control of the output beam of a multimode LMA fiber supporting 4 modes is demonstrated by digital holography in both continuous and ns pulsed regimes at 1064 nm. Our system allows dynamic compensation of beam pointing instabilities, external perturbations introducing low order aberrations and fluctuations of the relative phase of the modes supported by the fiber.
منابع مشابه
Transverse Modes in Large-Mode-Area Fibers
This thesis is devoted to the study of transverse modes in large-mode-area (LMA) fibers. It highlights the importance of transverse spatial-hole burning (TSHB) effect in LMA multimode fibers through experiments and simulations. The measured beam-quality factor decreases until the gain becomes saturated in an amplified spontaneous emission (ASE) source based on an Yb-doped LMA multimode fiber. A...
متن کاملPhase Only Synthesis of Antenna Patterns Using Iterative Restoration Methods
In this work, the method of iterative Fourier transform phase reconstruction, conventionally used in holography and optical image reconstruction, is applied to phase only synthesis of antenna patterns. The method is applied to two types of pattern synthesis problems: "main lobe beam shaping" and "side-lobe-level reduction". The proposed method is most useful in the efficient employment of attai...
متن کاملCorrelation-Based Multiplexing of Complex Amplitude Data Pages in a Holographic Storage System Using Digital Holographic Techniques
Holographic recording media can store the amplitude and the phase, or the complex amplitude, of a beam on the basis of holography. Owing to this characteristic, digital data can be encoded onto the complex amplitude of a signal beam in holographic data storage. However, most of conventional holographic storage systems encode digital data onto the amplitude alone because there are difficulties f...
متن کاملCharacteristics of Q-Switched Cladding-Pumped Ytterbium-Doped Fiber Lasers with Different High-Energy Fiber Designs
We theoretically and experimentally analyze Q-switched cladding pumped ytterbium-doped fiber lasers designed for high pulse energies. We compare the extractable energy from two high-energy fiber designs: 1) singleor few-moded low-NA large mode area (LMA) fibers and 2) large-core multimode fibers, which may incorporate a fiber taper for brightness enhancement. Our results show that the pulse ene...
متن کاملImpact of transverse spatial-hole burning on beam quality in large-mode-area Yb-doped fibers
The beam-quality factor of an amplified spontaneous emission source based on a Yb-doped, large-mode-area (LMA), multimode fiber was found to be optimized when the gain became saturated. A model using spatially resolved gain and transverse-mode decomposition of the optical field showed that transverse spatial-hole burning (TSHB) was responsible for the observed behavior. A simplified model witho...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics express
دوره 17 15 شماره
صفحات -
تاریخ انتشار 2009