Parallel Operation of Hybrid Loaded Resonant Converter Using Phase-Shift Control

ثبت نشده
چکیده

This paper presents a phase shifting method to adjust the combined output voltage of two Hybrid Loaded Resonant Converters connected in parallel. The method implements a fixed switching frequency and hence it is particularly useful in applications such as medical instrumentation where audible noise is not desirable. The design and analysis of parallel Hybrid Resonant Converters operating in discontinuous conduction mode using the phase shifting method will be described. Computer simulation to prove the feasibility of the phase shifting method in the design example will also be provided. Analysis of the characteristics of the output voltage produced by phase shifting control along with the steady state output analysis of the hybrid loaded resonant converters will also be discussed.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Experimental Study and steady state stability analysis of CLL-T Series Parallel Resonant Converter with Fuzzy controller using State Space Analysis

This paper presents a Closed Loop CLL-T (capacitor inductor inductor) Series Parallel Resonant Converter (SPRC) has been simulated and the performance is analysised. A three element CLL-T SPRC working under load independent operation (voltage type and current type load) is presented in this paper. The Steady state Stability Analysis of CLL-T SPRC has been developed using State Space technique a...

متن کامل

Voltage Regulation of DC-DC Series Resonant Converter Operating in Discontinuous Conduction Mode: The Hybrid Control Approach

Dynamic modeling and control of dc-dc series resonant converter (SRC) especially when operating in discontinuous conduction mode (DCM) is still a challenge in power electronics. Due to semiconductors switching, SRC is naturally represented as a switched linear system, a class of hybrid systems. Nevertheless, the hybrid nature of the SRC is commonly neglected and it is modeled as a purely contin...

متن کامل

Steady-state modeling of a phase-shift PWM parallel resonant converter

Purpose – To derive an analytical model for a dc-ac-dc parallel resonant converter operating in lagging power factor mode based on the steady-state operation conditions and considering the effects of a high-frequency transformer. Design/methodology/approach – A range of published works relevant to dc-ac-dc converters and their control methods based on pulse-width-modulation technique are evalua...

متن کامل

Operation of Three-Phase Resonant Converter in Single- Phase AC-to-DC Applications

A single-phase ac-to-dc converter using threephase modified series-parallel resonant converter is proposed in this paper. The three-phase resonant converter is analyzed using Fourier series approach. The design curves for a resonant converter of 2.5 kW rating are plotted. The converter components are selected based on the design curves. The converter is simulated for different load conditions u...

متن کامل

A new phase-controlled parallel resonant converter

A new phase-controlled resonant inverter is obtained by paralleling the ac loads of two identical parallel resonant inverters. A phase shift between the drive signals of the two inverters controls the amplitude of the output voltage of the new inverter. A voltage-driven rectifier is used as an ac load of the inverter which results in a phase-controlled parallel resonant dc-dc converter. A frequ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2007