Comparison of Input Shaping Teclhniques for Speed-Critical Multi-Mode Flexible Systems
نویسنده
چکیده
To achieve the highest level performance with computer controlled machines, the flexibility of the system must be taken into account. Feedforward methods are often the most desirable means of eliminating vibration. The fastest motions can be obtained by using the timeoptimal flexible-body command. These commands depend on the system parameters, actuator limits, and the desired motion. Input shaping is another feedforward method which does not depend on actuator limits and motion parameters, only the system natural frequencies and damping ratios. Input shaping and time-optimal control are compared for use on multi-mode flexible systems. The two methods are compared in terms of move speed, robustness to modeling errors, transient deflection, and ease of implementation.
منابع مشابه
Control of Flexible Link Robot using a Closed Loop Input-Shaping Approach
This paper is has addressed the Single Flexible Link Robot. The dynamical model is derived using Euler-Lagrange equation and then a proper controller is designed to suppress a vibration based-on Input-Shaping (IS) method. But, IS control method is an open loop strategy. Due to the weakness of open loop control systems, a closed loop IS control system is proposed. The achieved closed loop c...
متن کاملA magnetorheological fluid damper for robust vibration control of flexible rotor-bearing systems: A comparison between sliding mode and fuzzy approaches
Squeeze Film Dampers (SFD) are commonly used for passive vibration control of rotor-bearing systems. The Magnetorheological (MR) and Electrorheological (ER) fluids in SFDs give a varying damping characteristic to the bearing that can provide active control schemes for the rotor-bearing system. A common way to model an MR bearing is implementing the Bingham plastic model. Adding this model to th...
متن کاملAn Analysis of Frequency - Domain Input Shaping Designs forThree - Mode Flexible Systems
The technique of input shaping has recently been successfully applied to the problem of maneuvering exible structures without excessive residual vibration. In the method of input shaping, positive impulses are often desired because they can be used with any arbitrary (un-shaped) commands and do not cause actuator saturation (if these original unshaped commands do not cause ac-tuator saturation)...
متن کاملA Comparison of Input Shaping and Time-optimal Flexible-body Control
Input shaping is a method of reducing residual vibrations in computer-controlled machines. Shaped command profiles are generated by convolving a sequence of impulses, an input shaper, with the desired command signal. The shaped command profile will move the system without residual vibration. The performance of several types of input shapers is compared to the time-optimal flexible-body control ...
متن کاملCOMPARISON BETWEEN MINIMUM AND NEAR MINIMUM TIME OPTIMAL CONTROL OF A FLEXIBLE SLEWING SPACECRAFT
In this paper, a minimum and near-minimum time optimal control laws are developed and compared for a rigid space platform with flexible links during an orientating maneuver with large angle of rotation. The control commands are considered as typical bang-bang with multiple symmetrical switches, the time optimal control solution for the rigid-body mode is obtained as a bang-bang function and app...
متن کامل