Comparison between Lift and Drag-Driven VAWT Concepts on Low-Wind Site AEO
ثبت نشده
چکیده
This work presents a comparison between the Annual Energy Output (AEO) of two commercial vertical-axis wind turbines (VAWTs) for a low-wind urban site: both a drag-driven and a liftdriven concepts are examined in order to be installed on top of the new Via dei Giustinelli building, Trieste (Italy). The power-curves, taken from the product specification sheets, have been matched to the wind characteristics of the selected installation site. The influence of rotor swept area and rated power on the performance of the two proposed wind turbines have been examined in detail, achieving a correlation between rotor swept area, electrical generator size and wind distribution, to be used as a guideline for the calculation of the AEO. Keywords—Annual Energy Output, micro-generation technology, urban environment, Vertical-Axis Wind Turbine
منابع مشابه
Application of Circulation Controlled Blades for Vertical Axis Wind Turbines
The blades of a vertical axis wind turbine (VAWT) rotor see an inconsistent angle of attack through its rotation. Consequently, VAWT blades generally use symmetrical aerofoils with a lower lift-to-drag ratio than cambered aerofoils tailored to maximise horizontal axis wind turbine rotor performance. This paper considers the feasibility of circulation controlled (CC) VAWT blades, using a tangent...
متن کاملExperimental and numerical investigation of an optimized airfoil for vertical axis wind turbines
The present study addresses the experimental and numerical verification of the performance of a new airfoil design for lift driven vertical-axis wind-turbines (VAWT). The airfoil is obtained by a genetic algorithm optimization of the objective function proposed by Simão Ferreira and Geurts [19], which optimizes the aerodynamic performance of airfoils having a relatively larger thickness, provid...
متن کاملComparison of Lift and Drag Forces for Some Conical Bodies in Supersonic Flow Using Perturbation Techniques
Numerical methods are not always convergent especially in higher velocities when shock waves are involved. A comparison analysis is performed to study the supersonic flow over conical bodies of three different cross sections circular, elliptic and squircle (square with rounded corners) shaped using Perturbation techniques to find flow variables analytically. In order to find lift and drag forc...
متن کاملElastomeric Actuators on Airfoils for Aerodynamic Control of Lift and Drag
This paper investigates and characterizes the aerodynamic performance of a unique platform of airfoils with inflatable, elastomeric actuators. By controlling the inflation of stretchable and tough pneumatic bladders of silicone at specific locations of threedimensionally printed airfoils, experiments demonstrate it is possible to manipulate aerodynamic lift and drag. Measurements on morphable a...
متن کاملLow-Speed Wind-Tunnel Tests on some Slender Airbus Configurations
An experimentalinvestigation has been made of the subsonic lift, drag and longitudinal stability characteristics of models representing some alternative slender airbus configurations. For the same wing planform of aspect ratio 1.4 the lift, drag and pitching moment have been measured for two wings of maximum thickness/chord ratio 4 and 9 per cent respectively, both without and with various body...
متن کامل