Novel Microstrip Patch Antenna (MPA) Design for Bluetooth, IMT, WLAN and WiMAX Applications
نویسندگان
چکیده
In this paper, a multi resonant MPA capable of operating satisfactorily in the frequency range of 2.39 GHz to 5.79 GHz have been proposed. The antenna has been designed using substrate of FR4 material having dielectric constant of 4.4 with a conducting radiating patch on the substrate and a conducting ground plane on the bottom side of substrate. The ground plane has been partially reduced to improve the antenna bandwidth. The antenna performance has been analyzed in terms of various antenna parameters such as return loss (dB), impedance bandwidth (GHz), gain (dB), directivity (dBi), Half power Beam width (Degree), current density and VSWR. The antenna has been designed and simulated using CST Microwave Studio (2010). The designed MPA is suitable to be used for Bluetooth, IMT, WLAN and WiMAX applications. The antenna has bandwidth of 3.40 GHz and VSWR of less than 2. The antenna has been successfully fabricated and tested. It has been observed that the practical results obtained by testing the fabricated antenna using Network analyzer E5071C closely matches with the theoretical results obtained by simulating the antenna design in CST MWS 2010.
منابع مشابه
Modified Rectangular Patch Antenna Loaded With Multiple C Slots for Multiple Applications
A new multiple C-slotted microstrip patch antenna is proposed in the present study. A patch antenna is a wide-beam narrowband antenna. The microstrip patch antenna consists of a very thin metallic strip (patch) placed a small fraction of a wavelength above a ground plane. The patch can be designed in any possible shape and normally made of conducting materials such as copper or gold. This study...
متن کاملMulti Attribute Analysis of a Novel Compact UWB Antenna with Via-fed Elements for Dual Band Notch Function (RESEARCH NOTE)
A compact microstrip-fed antenna with dual notched bands is proposed. First, a simple basic configuration is presented for Ultra Wide Band (UWB) applications and then the dual band notched structure is extended from the UWB one. The basic structure of the UWB antenna consists of a simple square radiating patch and a ground plane with a wide square slot on back of the substrate. A semi-circle sh...
متن کاملDesign and Optimization of Multiple slots Microstrip Patch Antenna for WIMAX and WLAN Applications
In this paper, we present multiple L slots antenna for WIMAX and WLAN applications. wideband microstrip patch antenna for wireless applications. The coplanar waveguide fed microstrip patch antenna comprises of four rectangular patch array each embedded on three L slots and a Plus slot either on the patch or on the ground plane or on both the patch and the ground plane. The design results in red...
متن کاملA Dual band Human Shaped Microstrip Patch Antenna for 2.4 GHz and 5.4 GHz Applications
The article presents a structure of human shape microstrip patch antenna operating at dual frequencies. In this paper a rectangular patch of human shape cutting is proposed. The human shape antenna is designed for wireless applications, which works at 2.4 GHz and 5.4 GHz frequencies. This proposed antenna can be widely used for Wi-Fi (IEEE 802.11 standard), BLUETOOTH, WLAN, WiMAX (IEEE 802.16 a...
متن کاملMetamaterial Inspired Patch Antenna with L-shape Slot Loaded Ground Plane for Dual Band (wimax/wlan) Applications
Due to the integration of different wireless applications at different bands on a single device, multi-band microstrip patch antenna is the best solution keeping the overall size of the device small. In the present work, a metamaterial-inspired antenna is proposed for WiMAX/WLAN applications. Design studies, parametric analysis, simulation results along with measurements for a L-shape slotted g...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2014