Improving the NOx-BSFC Trade Off of a Turbocharged Large Diesel Engine Using Performance Simulation
نویسندگان
چکیده
The purpose of this study is to determine the optimum intake valve closing time of a large diesel engine having lower fuel consumption and lower NOx emission. The performance simulation has been conducted for this purpose, and a phenomenological combustion model is verified by experimental data of heat release rate and NOx emission in order to enhance the prediction quality of the performance simulation. The results of performance simulation are compared with measured data to confirm the modeling method and results. The fuel injection system simulation has been also performed to get fuel injection rate, and the results is also verified by experimental data of fuel injection pump pressure and injected fuel mass. The performance simulation investigate the application of Miller cycle to a large diesel engine, and so, the intake valve closing time is determined at the condition of reducing NOx emission and fuel consumption at the same time. As that result, Miller cycle has a feature that the maximum reduction of NOx emission is 15.7% while the improvement of specific fuel oil consumption is 1.7g/kWh.
منابع مشابه
Performance Evaluation and Emissions improving of Turbocharged DI Diesel Engine with Exhaust Gas Recirculation (EGR)
Nitrogen oxides (NOx) contribute to a wide range of environmental effects including the formation of acid rain and destroy ozone layer. In-cylinder high temperature flame and high oxygen concentration are the parameters which affect the NOx emissions. The EGR system is a very effective way for reducing NOx emission from a diesel engine (via reduction of these parameters), particularly at the...
متن کاملExperimental Study of the Effect of Castor Oil Biodiesel Fuel on Performance and Emissions of Turbocharged DI Diesel
Experimental test are carried out on a semi-heavy duty Motorsazan MT4.244 agricultural engine at various loads in order to evaluate performance and emissions of DI diesel engine using the blends of diesel fuel with 5%, 10%,15%,20% , 30%(by volume) Castor oil and pure diesel fuel separately. The result show that maximum decreasing of PM emission is 73.2% and is observed in B15 at 50%load and the...
متن کاملThe Effect of Valve Lift on In-Cylinder Flow, Performance and Emissions in a Turbocharged DI Diesel Engine
A computational optimization was performed for a direct-injection diesel engine using three-dimensional modeling. Fully transient CFD analyses of different valve profile strategies for the intake and compression strokes were performed to evaluate the effects on both engine performance and in-cylinder flow-field evolution. The turbulence model was used along with the second order linear upwin...
متن کاملMulti-Dimensional Modeling of the Effects of Spilt Injection Scheme on Performance and Emissions of IDI Diesel Engines
One of the important problems in reducing of pollutant emission from DI and IDI diesel engines is trade-off between soot and NOx. Split injection is one of the most powerful tools that makes the chance to shift the trade-off curve closer to origin. At the present work, the effect of split injection on the combustion process and emissions of a cylinder IDI diesel engine under the specification...
متن کاملExperimental Investigation of the Effects of Air Injectionand Injection Timingin a Natural Aspirated DI Diesel Engine
In this experimental study, the effect of creating an air jet inside the combustion chamber by establishing an air-cell inside of the piston body at different injection timings in a DI diesel engine has been studied at 2000 rpm and full load operation. The performed tests include studying the Soot and NOx emissions, combustion and performance parameters. The obtained experimental results show t...
متن کامل