Fabrication of two-dimensional close-packed shell structure in ceramic thin films.
نویسندگان
چکیده
TiO2 thin films with a periodical two-dimensional close-packed hemispherical structure were prepared on Si substrates using pulsed laser deposition and close-packed monolayer polystyrene colloidal crystals as a template. Compared with conventional methods, which use a top-down approach, this route supports low-cost production of a periodic structure. Additionally, it is applicable to various ceramics for use in applications related to photonic crystals, surface self-cleaning materials, data storage media, bioassays, and so on.
منابع مشابه
The effect of adding SBR latex to backup slurries on the properties of ceramic molds in investment casting
[1] S. Jones, M. Jolly, and K. Lewis, "Development of techniques for predicting ceramic shell properties for investment casting," British ceramic transactions, vol. 101, no. 3, pp. 106-113, 2002. [2] S. Pattnaik and M. K. Sutar, "Effect of saw dust content on slurry rheology and mechanical properties of the investment casting ceramic shell," International Journal of Metalcasting,...
متن کاملFabrication of MgF2-SiO2 Nanocomposite Thin Films and Investigation of Their Optical and Hydrophobic Properties
In this research, MgF2-2%SiO2/MgF2 thin films were applied on a glass substrate. At first, MgF2 thin films with the optical thickness were deposited on the glass slide substrates. Then, MgF2-2%SiO2 thin films were deposited on the glass coated with MgF2 thin films. Finally, the nanocomposite thin films were surface treated by the PFTS solution. Characterization of the thin film was done by X-Ra...
متن کاملInvestigations on structural and electrical properties of Cadmium Zinc Sulfide thin films
Nowadays, II – IV group semiconductor thin films have attracted considerable attention from the research community because of their wide range of application in the fabrication of solar cells and other opto-electronic devices. Cadmium zinc sulfide (Zn-CdS) thin films were grown by chemical bath deposition (CBD) technique. X-ray diffraction (XRD) is used to analyze the structure and crystallite ...
متن کاملFabrication Of Cu(In,Ga)Se2 Solar Cells With In2S3 Buffer Layer By Two Stage Process
Cu(In,Ga)Se2 thin films (CIGS) on metallic substrate (titanium, molybdenum, aluminum, stainless steel) were prepared by a two-step selenization of Co-evaporated metallic precursors in Se-containing environment under N2 gas flow. Structural properties of prepared thin film were studied. To characterize the optical quality and intrinsic defect nature low-temperature photoluminescence, were perfor...
متن کاملUltraviolet detectors based on annealed zinc oxide thin films: epitaxial growth and physical characterizations
In this report, ultraviolet (UV) detectors were fabricated based on zinc oxide thin films. The epitaxial growth of zinc oxide thin films was carried out on bare glass substrate with preferred orientation to (002) plane of wurtzite structure through radio frequency sputtering technique. The structural properties indicated a dominant peak at 2θ=34.28º which was matched with JCPDS reference card N...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Science and technology of advanced materials
دوره 12 3 شماره
صفحات -
تاریخ انتشار 2011