Experimental analysis and visualization of spatiotemporal patterns in spouted fluidized beds.
نویسندگان
چکیده
A numerical characterization based on experimental data of the spouting regime in a two-dimensional fluidized bed is presented. The aspect ratio of the bed allowed for good visualization of the spouting and solids circulation as the spouting jet gas velocity was varied to highlight the visited bifurcation sequence. Digital video sequences were recorded and then preprocessed for numerical analysis. In this paper, the proper orthogonal decomposition (POD) was applied to these data sets in order to identify and separate the dominant spatial features from the temporal evolution of the spouting dynamics. The results indicate that the overall spatiotemporal dynamics can be captured by a few POD eigenfunctions, and that the POD amplitudes can be used to distinguish between varying degrees of spouting.
منابع مشابه
Applicability of the spouting regime for drying of biomass wastes in conical spouted beds with a draft tube
The operating conditions in spouted bed regime of uniform beds consisting of different biomass wastes dry and wet have been studied to determine the applicability of conical spouted beds with a draft tube in the drying of biomass wastes. This experimental study has been carried out at room temperature and the effect of the solid humidity on the stability of beds of biomass wastes has been deter...
متن کاملStudy of Pressure Drop in the 2D Spouted Bed with Conical Base of Binary Particle Mixtures: Effects of Particle Size and Density
In this study, the pressure drop for the binary mixtures of particles differing in size and density in a pseudo-2D spouted bed was experimentally studied. A binary mixture of solid particles including sand, Gypsum, and polyurethane was used in the experimental setup. Effects of static bed height, cone angle, particles diameter, and a particles weight fraction on the bed pressure drop were e...
متن کاملDetermination of Cluster Hydrodynamics in Bubbling Fluidized Beds by the EMMS Approach
The local solid flow structure of gas-solid bubbling fluidized bed was investigated to identify and characterize the particle clusters. Extensive mathematical calculations were carried out using the energy-minimization multi-scale (EMMS) approach for evaluating cluster properties including the velocity, the size and the void fraction of clusters in the dense phase of the bed. The results showed...
متن کاملPrediction of Minimum Spout Velocity and Moisture Distribution of Ammonium Perchlorate Particles in a Spouted Bed Dryer
Ammonium perchlorate particles have been dried in a laboratory spouted bed dryer (screen-bottomed type) which is categorized as a fluidized bed dryer. The solid particles obtained in this process of drying were semi-porous and known as the group D of Geldart classification. The variations of moisture content with resident time, the effects of bed height on the pressure dro...
متن کاملHeat Transfer of Liquid/ Solid Fluidized Beds for Newtonian and Non-Newtonian Fluids
The excellent performance of fluidized bed heat exchangers is due to the interaction between particles and heat transfer surface and to the mixing effects in the viscous sublayer. In this paper, the results of experimental investigations on heat transfer for a wide range of Newtonian and non-Newtonian (shear-thinning power law) fluids are presented. New design equations have been developed ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Chaos
دوره 14 2 شماره
صفحات -
تاریخ انتشار 2004