Pulse Electrodeposition of 2.4 T Co37Fe63 Alloys at Nanoscale for Magnetic Recording Application
نویسندگان
چکیده
Pulse deposition of 2.4 T Co37Fe63 alloy in photoresist features with 40 nm critical dimension and high aspect ratio is presented. The design of the pulse deposition parameters is described in terms of the transport limitations through the diffusion layer, electrochemical interface stability with respect to Fe(OH)3 precipitation, and the optimum conditions for additive (Saccharin) adsorption. The alloy grain size and crystal structure in the nanoconfined electrode geometry is compared versus the thin film and relevant implications for magnetic recording are discussed. The 2.4 T Co38Fe61Pd1 alloy is introduced as a possible way to improve the corrosion properties of 2.4 T Co37Fe63 alloy.
منابع مشابه
Critical Parameters of Solution Design for Electrodeposition of 2.4 T CoFe Alloys
The electrodeposition of soft, high magnetic moment alloys has become the critical fabrication step in manufacturing of magnetic recording heads. The need for ultimately high magnetic moment alloys (2.4 T CoFe) and the electrodeposition process capable of delivering magnetic structures with dimension in the range of several tens of nanometers are the new tasks that have to be addressed if the f...
متن کاملInvestigations of Magnetic Properties Through Electrodeposition Current and Controlled Cu Content in Pulse Electrodeposited CoFeCu Nanowires
CoFeCu nanowires were deposited by pulsed electrodeposition technique into the porous alumina templates by a two-step mild anodization technique, using the single-bath method. The electrodeposition was performed in a constant electrolyte while Cu constant was controlled by electrodeposition current. The electrodeposition current was 3.5, 4.25, 5 and 6 mA. The effect of electrodeposition current...
متن کاملZinc-Nickel Binary Alloys Electrodeposition of Steel Using Pulse Current
Zinc-Nickel electrodeposits have been widely adopted for surface treatment of automobile steel sheet for high corrosion resistance. In this work the effect of pulse parameters on the Zn-Ni alloy electrodeposits was investigated. The hardness, thickness, corrosion resistance and composition of deposits thus produced were investigated. The surface topography of the deposits was also observed in S...
متن کاملElectrochemical Preparation and Characterization of Mn5O8 Nanostructures
Electrochemical synthesis followed by heat-treatment is a facile and easy method for preparation of nanostructured metal oxides. Herein we report nanostructured Mn5O8 prepared through pulse cathodic deposition followed by heat-treatment for the first time. For the preparation of Mn5O8 nanorods, pulse cathodic electrodeposition was first done from 0.005M Mn(NO3)2 at the current density of 5 mA c...
متن کاملZinc-Nickel Binary Alloys Electrodeposition of Steel Using Pulse Current
Zinc-Nickel electrodeposits have been widely adopted for surface treatment of automobile steel sheet for high corrosion resistance. In this work the effect of pulse parameters on the Zn-Ni alloy electrodeposits was investigated. The hardness, thickness, corrosion resistance and composition of deposits thus produced were investigated. The surface topography of the deposits was also observed in S...
متن کامل