Poly-Siloxane Modified Poly-Urethane based Long Life, High Gloss and Colour Retaining Coatings for Marine Applications

ثبت نشده
چکیده

A ship or a marine structure operates in extremely harsh corrosive environment. Marine environment is more aggressive than most inland environments. Several areas of sea going vessel, typically consist of, the superstructure, boot-top area under splash zone, fully immersed areas such as ship-hull. It is well known now that the rate of corrosion of is generally, the highest for splash zone where it is exposed to dry and wet cycles alternately. That is why excessive corrosion takes place on boot top areas of the ship.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Spotlight- Modified poly(vinylpyrrolidone)

Cross-linked poly(vinylpyrrolidone) (PVP) is a heterogeneous and polymeric support that has been widely used in the preparation of numerous reagents and catalysts because of its commercial availability, stability, reasonable high loading capacity, good physicochemical structure and facile functionalization. Beside various applications in industry such as stabilizer, sugar coating and film coati...

متن کامل

Spotlight- Modified poly(vinylpyrrolidone)

Cross-linked poly(vinylpyrrolidone) (PVP) is a heterogeneous and polymeric support that has been widely used in the preparation of numerous reagents and catalysts because of its commercial availability, stability, reasonable high loading capacity, good physicochemical structure and facile functionalization. Beside various applications in industry such as stabilizer, sugar coating and film coati...

متن کامل

Coatings based on side-chain ether-linked poly(ethylene glycol) and fluorocarbon polymers for the control of marine biofouling.

The preparation of side group modified polystyrene-based surface-active block copolymers (SABC) for use as marine fouling resistance/release applications is described. Modifying moieties such as poly(ethylene glycol) (PEG) and semifluorinated segments were used. A novel bilayer methodology has been employed that provides both suitable mechanical properties through the use of an elastomeric prim...

متن کامل

Electrospun polyurethane as an alternative ventricular catheter and in vitro model of shunt obstruction

Intracranial pressure and volume vary considerably between hydrocephalic patients, and with age, health and haemodynamic status; if left untreated, intracranial pressure rises and the ventricular system expands to accommodate the excess cerebrospinal fluid, with significant morbidity and mortality. Cerebrospinal fluid shunts in use today have a high incidence of failure with shunt obstruction b...

متن کامل

Effect of ultraviolet/ozone treatment on the surface and bulk properties of poly(dimethyl siloxane) and poly(vinylmethyl siloxane) networks

We present a comparative study aiming at comprehending the effect of ultraviolet/ozone treatment on the modification of poly(dimethyl siloxane) (PDMS) and poly(vinylmethyl siloxane) (PVMS) silicone elastomers networks (SENs). Both PDMS and PVMS SENs undergo dramatic changes in their properties when exposed to UVO. The surface chemical composition of both PDMS and PVMS at long UVO treatment time...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017