Optimal Placement of Conservation Practices Using Genetic Algorithm with SWAT
نویسندگان
چکیده
The effectiveness of conservation practices depends on their placement on the fields within the watershed. Cost-effective placement of these practices for maximum water quality benefits on each field requires comparing a very large number of possible land-use scenarios. To address this problem, we combine the tools of evolutionary algorithm with the Soil and Water Assessment Tool (SWAT) model and cost data to develop a trade-off frontier of least cost of achieving nutrient reductions and the corresponding locations of conservation practices. This approach was applied to the Raccoon River Watershed, which drains about 9,400 km of an intensive agriculture region in west-central Iowa. Applying genetic algorithm to the calibrated SWAT modeling setup produced multitudes of optimal solutions of achieving nutrient reductions in relation to the total cost of placing these practices. For example, a 30% reduction in nitrate (and a corresponding 53% reduction in phosphorus) at the watershed outlet can be achieved with a cost of $80 million per year. This solution frontier allows policymakers and stakeholders to explicitly see the trade-offs between cost and nutrient reductions.
منابع مشابه
Optimization of Agricultural BMPs Using a Parallel Computing Based Multi-Objective Optimization Algorithm
Beneficial Management Practices (BMPs) are important measures for reducing agricultural non-point source (NPS) pollution. However, selection of BMPs for placement in a watershed requires optimizing available resources to maximize possible water quality benefits. Due to its iterative nature, the optimization typically takes a long time to achieve the BMP trade-off results which is not desirable ...
متن کاملEconomic Evaluation of Optimal Capacitor Placement in Reconfiguration Distribution System Using Genetic Algorithm
Optimal capacitor placement, considering power system loss reduction, voltage profile improvement, line reactive power decrease and power factor correction, is of particular importance in power system planning and control. The distribution system operator calculates the optimal place, number and capacity of capacitors based on two major purposes: active power loss reduction and return on invest...
متن کاملOptimal Placement of Phasor Measurement Units to Maintain CompleteObservability Considering Maximum Reliability by Non-dominated Sorting Genetic Algorithm-II (NSGA-II)
Ever-increasing energy demand has led to geographic expansion of transmission lines and their complexity. In addition, higher reliability is expected in the transmission systemsdue to their vital role in power systems. It is very difficult to realize this goal by conventional monitoring and control methods. Thus, phasor measurement units (PMUs) are used to measure system parameters. Although in...
متن کاملOptimal Placement of DGs in Distribution System including Different Load Models for Loss Reduction using Genetic Algorithm
Distributed generation (DG) sources are becoming more prominent in distribution systems due to the incremental demands for electrical energy. Locations and capacities of DG sources have great impacts on the system losses in a distribution network. This paper presents a study aimed for optimally determining the size and location of distributed generation units in distribution systems with differ...
متن کاملOptimal DG Placement for Power Loss Reduction and Improvement Voltage Profile Using Smart Methods
Distributed Generations (DGs) are utilized to supply the active and reactive power in the transmission and distribution systems. These types of power sources have many benefits such as power quality enhancement, voltage deviation reduction, power loss reduction, load shedding reduction, reliability improvement, etc. In order to reach the above benefits, the optimal placement and sizing of DG is...
متن کامل