Optimal Design and Fabrication of Fine Diffractive Optical Elements Using Proximity Correction with Electron-beam Lithography
نویسنده
چکیده
منابع مشابه
Fabrication of Binary Diffractive Lens on Optical Films by Electron Beam Lithography
Two types of lenses can focus light: an optical lens using refraction phenomenon and a diffractive lens using diffraction phenomena. Table 1 shows the characteristics of each lens. The focal length of the diffractive lens is controlled by the structures of the lens, as mentioned in detail in Section 2.2. This suggests that the focal length of the diffractive lens is independent of refractive in...
متن کاملThree-dimensional diffractive micro- and nano-optical elements fabricated by electron-beam lithography
The broad development of the microand nano-technologies in the past few years increased the need of techniques capable of fabricating sub-micron structures with arbitrary surface profiles. Out of the several fabrication approaches (HEBS lithography, laser writing, etc.) the electron beam writing stands out as the one capable of the highest resolution, superior alignment accuracy and very small ...
متن کاملHigh resolution fabrication of nanostructures using controlled proximity nanostencil lithography
Nanostencil lithography has a number of distinct benefits that make it an attractive nanofabrication processes, but the inability to fabricate features with nanometer precision has significantly limited its utility. In this paper, we describe a nanostencil lithography process that provides sub-15 nm resolution even for 40-nm thick structures by using a sacrificial layer to control the proximity...
متن کاملDiffractive optics for combined spatial- and mode- division demultiplexing of optical vortices: design, fabrication and optical characterization.
During the last decade, the orbital angular momentum (OAM) of light has attracted growing interest as a new degree of freedom for signal channel multiplexing in order to increase the information transmission capacity in today's optical networks. Here we present the design, fabrication and characterization of phase-only diffractive optical elements (DOE) performing mode-division (de)multiplexing...
متن کاملComputer Simulation from Electron Beam Lithography to Optical Lithography
Simulation of electron beam lithography and optical lithography has been combined to investigate the influence of a distorted photomask feature on final photoresist image. Unlike the previous optical lithography simulation which was based on ideal mask design, the combined simulation has shown that mask distortion due to electron proximity effect play an important role in worsening the optical ...
متن کامل