Anomalous drying dynamics of a polymer solution on a substrate.

نویسندگان

  • Shunto Arai
  • Masao Doi
چکیده

When a polymer solution with volatile solvent is exposed to open air, an elastic layer (called a skin) is often formed at the surface of the solution due to evaporation of the solvent. After such a skin is formed, further extraction of the solvent from the solution caused by evaporation has generally been considered to reduce the pressure in the solution. We have found that, in PMMA/acetone droplet placed on a substrate, the liquid below the skin layer is pushed out as the solvent evaporates further. These phenomena indicate that the pressure in the solution increases by solvent evaporation. It is considered to be caused by the shrinkage and other structural changes taking place in the skin layer.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Dynamics of Drying Process of Polymer Solution Droplets: Analysis of Polymer Transport and Control of Film Profiles

Drying process of droplets on a flat substrate is a commonly observed phenomenon in our daily life. Because of their important roles in the nature and in industry, drying droplets have been a topic of continued interest for several decades. Recently, the drying process of droplets containing nonvolatile materials is focused as an important problem in inkjet printing, which is attracting increas...

متن کامل

Control of the Marangoni Effect in the Drying Process of a Polymer Solution Coated on a Flat Substrate through Temperature, Evaporation and Solute Concentration Management

The drying process of polymer solutions coated on a flat substrate is very important in various industrial applications. We have proposed and modified a model of the drying process of a polymer solution coated on a flat substrate for uniform polymer film deposition. We used the model to control the thickness of a thin film after drying through management of the temperature, evaporation, and con...

متن کامل

Numerical Study on Parameters Affecting the Structure of Scaffolds Prepared by Freeze-Drying Method

Freeze-drying is one of the most used methods for preparing scaffolds and is very sensitive to the material and operational parameters such as nucleation temperature, thermal properties of the mold, cooling rate, set freezing point, and slurry height. In the present study, a Finite Element Method (FEM) based code was developed to investigate the effects of such parameters and to eventually ...

متن کامل

Conductive Polythiophene Nanoparticles Deposition on Transparent PET Substrates: Effect of Modification with Hybrid Organic-inorganic Coating (RESEARCH NOTE)

In this work, Poly(ethyleneterephthalate) (PET) substrate was treated using KOH solution and was modified using hybrid O-I coating containing PCL )polycaprolactone( as organic phase and TEOS )tetraethoxysilane( as inorganic phase. The coating was prepared through a sol-gel process and applied on the surface by dip coater. Then, electrically conducting polythiophene (PTh) nanoparticles were depo...

متن کامل

Optimization of the electrospinning process of polyurethane nanofibers and their filtration performance for use in respiratory protection mask filters

Background and Aim: Electrospun nanofibers can be used to produce filter media in personal protective equipment for the military. The present study aimed to optimize the electrospinning process used to create polyurethane nanofiber substrates and compare the optimum substrate filtration performance with a typical commercial substrate used in the structure of N95 respirators. Methods: In this ex...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • The European physical journal. E, Soft matter

دوره 36 6  شماره 

صفحات  -

تاریخ انتشار 2013