Aurivillius ceramics: Bi4Ti3O12-based piezoelectrics
نویسندگان
چکیده
Aurivillius oxides family has attracted great interest in the last years due to their promising electrical properties as high temperature piezoelectric materials. Piezoelectric materials that could operate in extreme conditions of use (elevated temperatures and hostile environments) could be of particular interest for different technological applications. Furthermore, increasing concerns for environmental issues have promoted the study of new lead-free piezoelectric materials. This article examines how the development of these materials has taken place from their discovery at the end of the 40’s and the existing knowledge about their processing and properties. ©2008 The Ceramic Society of Japan. All rights reserved.
منابع مشابه
Synthesis and structure of Bi 5 FeTi 3 O 15 ceramics
The aim of the present research was to fabricate and study crystal structure and phase composition of Bi5FeTi3O15 (BTFO) ceramics exhibiting Aurivillius type structure. By means of simultaneous thermal analysis and X-ray diffraction analysis the process of synthesis of BTFO ceramics has been studied. Mixed oxide method followed by pressureless sintering was used for ceramics preparation. Three ...
متن کاملIN-SITU XRD TO OPTIMIZE POWDER SYNTHESIS OF AURIVILLIUS PHASES, M.S. Haluska, S.A. Speakman, S.T. Misture, pp. 110-116
In situ x-ray diffraction was used to optimize the synthesis of Aurivillius structure ceramic powders. Powders were prepared via conventional solid-state synthesis and the Pechini polymer precursor method. The phases Bi4Ti3O12, and Bi2Sr2Nb2TiO12 were studied. The Bi4Ti3O12 phase formed easily, regardless of processing route, between 400-500C and phase purity was achieved by 700C when using the...
متن کاملFerroelectricity in intergrowth Bi3TiNbO9–Bi4Ti3O12 ceramics
Monophase intergrowth Bi3TiNbO9–Bi4Ti3O12 BTN-BIT ceramics were synthesized by solid-state reaction method. In the temperature dependence of dielectric permittivity, two anomalies appeared at 945 and 1114 K, respectively. The ferroelectric hysteresis loop measurement revealed that the 2Pr is 20 C/cm 2, nearly as twice as that of the BTN ceramic. The crystal structure analysis indicated that the...
متن کاملCobalt-Substituted Seven-Layer Aurivillius Bi8Fe4Ti3O24 Ceramics: Enhanced Ferromagnetism and Ferroelectricity
In this work, Aurivillius-phase Bi8Fe4-xCoxTi3O24 (7-BFCT, 0 ≤ x ≤ 0.4) powders and ceramics were successfully prepared by the combination of citrate combustion and hot-press methods. X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM) indicate a successful synthesis of the pure phase of the 7-BFCT ceramics, and all the samples showed a good seven-layer structur...
متن کاملBase Metal Co-Fired Multilayer Piezoelectrics
Piezoelectrics have been widely used in different kinds of applications, from the automobile industry to consumer electronics. The novel multilayer piezoelectrics, which are inspired by multilayer ceramic capacitors, not only minimize the size of the functional parts, but also maximize energy efficiency. Development of multilayer piezoelectric devices is at a significant crossroads on the way t...
متن کامل