Texture dependent strain rate sensitivity of ultrafine-grained aluminum films

نویسندگان

  • Ehsan Izadi
  • Jagannathan Rajagopalan
چکیده

Article history: Received 25 October 2015 Received in revised form 2 December 2015 Accepted 3 December 2015 Available online 17 December 2015 We investigated the strain rate sensitivity (SRS) of freestanding ultrafine-grained aluminum films with similar thickness (~240 nm) and mean grain size (~275 nm) but highly dissimilar texture. For (110) textured bicrystalline films, flow stress increased by 14% (m = 0.017) as the strain rate was varied from ~7 × 10/s to 5 × 10/s. In contrast, for non-textured films the flow stress increased by more than 90% (m = 0.103) over a similar strain rate range. The drastic difference in SRS can be explained by texture-induced changes in deformation mechanisms of the films, as revealed by in situ TEM straining experiments. © 2015 Elsevier Ltd. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Evolution of texture in an ultrafine and nano grained magnesium alloy

The evolution of texture was discussed during the formation of ultra-fine and nano grains in a magnesium alloy severely deformed through accumulative back extrusion (ABE). The microstructure and texture obtained after applying multiple deformation passes at temperatures of 100 and 250°C were characterized. The results showed that after single ABE pass at 100°C an ultrafine/nano grained microstr...

متن کامل

Effect of grain size on strain rate sensitivity of cryomilled Al– Mg alloy

Al–Mg alloy powder was cryomilled to achieve a nanocrystalline (NC) structure having an average grain size of 50 nm with high thermal stability, and then consolidated by quasi-isostatic forging. The consolidation resulted in a bulk material with ultrafine grains of about 250 nm, and the material exhibited enhanced strength compared to conventionally processed Al–Mg alloy. The hardness of as-cry...

متن کامل

Developing ultrafine-grained materials with high strength and good ductility for micro-forming applications

Materials with ultrafine grain sizes are attractive for use in micro-forming operations. High-pressure torsion (HPT) is an effective technique that allows disc materials subjected to torsional deformation to generate microstructures with significant grain refinement. Generally, ultrafine-grained materials exhibit high strength but their ductility is limited because they have both a low rate of ...

متن کامل

Grain rotations in ultrafine-grained aluminum films studied using in situ TEM straining with automated crystal orientation mapping

• Large grain rotations occur during loading and are partially or fully reversible in a significant fraction of grains during

متن کامل

EBSD characterization of nano/ultrafine structured Al/Brass composite produced by severe plastic deformation

In the present work, nano/ultrafine structured Al/Brass composite was produced by accumulative roll bonding (ARB) up to eight cycles. The evolution of grain refinement and deformation texture and their effect on the mechanical properties were investigated. It was observed that by increasing the ARB cycles, due to the difference in flow properties of the metal constituents, brass layers necked, ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016