Development and validation of static simulation model for CO2 heat pump
نویسندگان
چکیده
A simulation model for the CO2 heat pump water heater was developed and validated in this study. Component models of the gas cooler, evaporator, compressor, and expansion valve were constructed with careful consideration for the heat transfer performances. To validate the simulation model, experiments were carried out using an actual CO2 heat pump water heater (water heating capacity: 22.3 kW; hotwater temperature: 90 C). In simulations and experiments, the effects of the inlet water temperature and outside air temperature on the system characteristics were discussed. As a result, the average difference in COP between the simulation results and experimental results is 1.5%. 2011 Elsevier Ltd. All rights reserved.
منابع مشابه
Dynamic Modeling of Microclimate and Environmental Control Strategies in a Greenhouse Coupled with a Heat Pump System
The purpose of this study was to develop and validate a dynamic simulation model to be employed in accurate prediction of microclimate in a greenhouse as a function of dynamic environmental factors. The model has options to evaluate the effects of location, time of the year, orientation, single and double polyethylene glazings, conventional and heat pump heating and cooling systems, open and co...
متن کاملComputational Fluid Dynamics Simulation and Experimental Validation of Hydraulic Performance of a Vertical Suspended API Pump (RESEARCH NOTE)
For a long period of time, design and manufacturing technology of high flow rated vertically suspended pumps (VSPs) which have an extensive applications in many industries such as water and wastewater, mining, petrochemical and oil and gas industries, used to be imported from European countries. For the first time in Iran's pump industry, with the support of Ministry of Petrochemical[ah1] and ...
متن کاملHeat Pump Cooling and Greenhouse Microclimates in Open and Confined Greenhouse Systems
The purpose of this study was to determine and compare the performances of conventional and heat pump systems for cooling open and closed loop (confined) greenhouse systems. A dynamic simulation model was developed and validated to predict energy and mass exchanges in a greenhouse as a function of dynamic environmental factors. The model has options to evaluate the effects of location, time of ...
متن کاملDesign and Development of Mathematical Model for Static Mixer
A numerical model for simulating Residence Time Distribution (RTD) of turbulent flows in helical static mixers is proposed and developed to improve the understanding of static mixers. The results of this model is presented in terms of different volumetric flow rate to illustrate the complicated flow patterns that drive the mixing process i...
متن کاملNumerical Simulation of Cavitation in Mixed Flow Pump
The purpose of this study is to investigate the performance and three-dimensional behavior of the flow in a mixed flow pump and the way cavitation phenomenon is affected by different parameters such as fluid temperature, pump speed and flow rate. Computational fluid dynamic software FLUENT 6.3 was utilized to simulate the whole flow field of the pump. RNG k-ε model combined with standard wall f...
متن کامل