Corrective Solutions of Steady State Power System via Newton Optimization Method
نویسندگان
چکیده
This paper focuses a methodology to determine corrective adjustments in the electric network when the steady state power system equations have no real solution. Generally, this happens if the system is heavily loaded and/or if a severe contingency occurs. The proposed methodology is a version of the Newton optimization method with step length control. The summation of the squared active and reactive power mismatches is used as the cost function. The efficiency of the proposed strategy is assessed with five power systems, the IEEE 14, 30 and 118 buses and two real networks of 749 and 1916 buses equivalent to the Brazilian South-Southeastern power system.
منابع مشابه
Rotor Design of IPMSM Traction Motor Based on Multi- Objective Optimization using BFGS Method and Train Motion Equations
In this paper a multiobjective optimal design method of interior permanent magnet synchronous motor ( IPMSM) for traction applications so as to maximize average torque and to minimize torque ripple has been presented. Based on train motion equations and physical properties of train, desired specifications such as steady state speed, rated output power, acceleration time and rated speed of tract...
متن کاملComputation of the Periodic Steady State in Systems with Nonlinear Components Using a Hybrid Time and Frequency Domain Methodology
The basic principles of an eficient new methodology for the calculation of the non-sinusoidal periodic steady state in system with nonlinear and timevarying components are described. All linear parts, including the network and part of he loads. are represented in the frequency domain, while nonlinear and time-varying components, mainly loads, are represented in the time domain. This hybrid proc...
متن کاملMaintainability Policy for Deteriorating System with Inspection and Common Cause Failure (TECHNICAL NOTE)
A condition based preventive and corrective maintenance policy is proposed for a continuously operating system. The condition of the system is assumed to deteriorate with time. The model incorporates both deterioration as well as random common cause failures. The deterioration stages are modeled as discrete state processes. The system is put to random inspection to know the condition. The mean ...
متن کاملDistributed Quasi-Newton Method and its Application to the Optimal Reactive Power Flow Problem
We consider a distributed system of N agents, on which we define a quadratic optimization problem subject to a linear equality constraint. We assume that the nodes can estimate the gradient of the cost function by measuring the steady state response of the system. Even if the cost function cannot be decoupled into individual terms for the agents, and the linear constraint involves the whole sys...
متن کاملMultiple solutions of a nonlinear reactive transport model using least square pseudo-spectral collocation method
The recognition and the calculation of all branches of solutions of the nonlinear boundary value problems is difficult obviously. The complexity of this issue goes back to the being nonlinearity of the problem. Regarding this matter, this paper considers steady state reactive transport model which does not have exact closed-form solution and discovers existence of dual or triple solutions in so...
متن کامل