Performace of Dilute Nitride Triple Junction Space Solar Cell Grown by MBE
نویسندگان
چکیده
Dilute nitride arsenide antimonide compounds offer widely tailorable band-gaps, ranging from 0.8 eV to 1.4 eV, for the development of lattice-matched multijunction solar cells with three or more junctions. Here we report on the performance of GaInP/GaAs/GaInNAsSb solar cell grown by molecular beam epitaxy. An efficiency of 27% under AM0 conditions is demonstrated. In addition, the cell was measured at different temperatures. The short circuit current density exhibited a temperature coefficient of 0.006 mA/cm2/°C while the corresponding slope for the open circuit voltage was -6.8 mV/°C. Further efficiency improvement, up to 32%, is projected by better current balancing and structural optimization.
منابع مشابه
Ingap/gaas/inganas Solar Cells for Space Application
We report a triple junction InGaP/GaAs/InGaNAs solar cell with efficiency of ~31% at AM0, 25 °C fabricated using a combined molecular beam epitaxy (MBE) and metal-organic chemical vapour deposition (MOCVD) processes. The prototype cells comprise of InGaNAs (Indium Gallium Nitride Arsenide) bottom junction grown on a GaAs (Gallium Arsenide) substrate by MBE and middle and top junctions deposited...
متن کامل31% European Ingap/gaas/inganas Solar Cells for Space Application
We report a triple junction InGaP/GaAs/InGaNAs solar cell with efficiency of ~31% at AM0, 25 °C fabricated using a combined molecular beam epitaxy (MBE) and metal-organic chemical vapour deposition (MOCVD) processes. The prototype cells comprise of InGaNAs (Indium Gallium Nitride Arsenide) bottom junction grown on a GaAs (Gallium Arsenide) substrate by MBE and middle and top junctions deposited...
متن کاملGrowth of Metamorphic InGaP for Wide-Bandgap Photovoltaic Junction by MBE
Metamorphic triple-junction solar cells can currently attain efficiencies as high as 41.1%. Using additional junctions could lead to efficiencies above 50%, but require the development of a wide bandgap (2.0-2.2eV) material to act as the top layer. In this work we demonstrate wide bandgap InyGa1-yP grown on GaAsxP1-x via solid source molecular beam epitaxy. Unoptimized tensile GaAsxP1-x buffers...
متن کاملطراحی و شبیهسازی سلول خورشیدی سهپیوندی بر مبنای چاه کوانتومی
In this paper, the purpose is to improve the efficiency of triple-junction solar cell by introducing quantum well into GaAs junction. Firstly, InGaP/GaAs/InGaAs triple-junctions solar cell has been simulated. Then, a multiple stepped quantum wells (MSQWs), in which InGaAs well is sandwiched by InGaAsP as stepped layer, and the barrier is GaAs, has been introduced into intrinsic region of single...
متن کاملMetamorphic GaAsP buffers for growth of wide-bandgap InGaP solar cells
GaAsxP1−x graded buffers were grown via solid source molecular beam epitaxy MBE to enable the fabrication of wide-bandgap InyGa1−yP solar cells. Tensile-strained GaAsxP1−x buffers grown on GaAs using unoptimized conditions exhibited asymmetric strain relaxation along with formation of faceted trenches, 100–300 nm deep, running parallel to the 01̄1 direction. We engineered a 6 m thick grading str...
متن کامل