Crack Deflection and Propagation in Layered Silicon Nitride/Boron Nitride Ceramics
نویسندگان
چکیده
Crack deflection and the subsequent growth of delamination cracks can be a potent source of energy dissipation during the fracture of layered ceramics. In this study, multilayered ceramics that consist of silicon nitride (Si3N4) layers separated by boron nitride/silicon nitride (BN/Si3N4) interphases have been manufactured and tested. Flexural tests reveal that the crack path is dependent on the composition of the interphase between the Si3N4 layers. Experimental measurements of interfacial fracture resistance and frictional sliding resistance show that both quantities increase as the Si3N4 content in the interphase increases. However, contrary to existing theories, high energyabsorption capacity has not been realized in materials that exhibit crack deflection but also have moderately high interfacial fracture resistance. Significant energy absorption has been measured only in materials with very low interfacial fracture resistance values. A method of predicting the critical value of the interfacial fracture resistance necessary to ensure a high energy-absorption capacity is presented.
منابع مشابه
Elevated-Temperature Mechanical Properties of Silicon Nitride/Boron Nitride Fibrous Monolithic Ceramics
A unique, all-ceramic material capable of nonbrittle fracture via crack deflection and delamination has been mechanically characterized from 25° through 1400°C. This material, fibrous monoliths, was comprised of unidirectionally aligned 250 mm diameter silicon nitride cells surrounded by 10 to 20 mm thick boron nitride cell boundaries. The average flexure strengths of fibrous monoliths were 510...
متن کاملInfluence of Microstructure and Temperature on the Interfacial Fracture Energy of Silicon Nitride/Boron Nitride Fibrous Monolithic Ceramics
The microstructure and interfacial fracture energy of silicon nitride/boron nitride fibrous monoliths, GBN, were determined as a function of starting silicon nitride composition and temperature using the method described by Charalambides. The glassy phase created by the sintering aids added to the silicon nitride cells was shown to migrate into the boron nitride cell boundaries during hot-press...
متن کاملCriteria for Crack Deflection-Penetration in EBC Coated Ceramics: A Parametric Study
This article discusses results obtained from a parametric study to analytically evaluate the impingement of a crack at the interface of an environmental barrier coating (EBC) and a monolithic Silicon nitride (Si 3 N 4) layered ceramics substrate. The study establishes a correlation that leads to determine if the crack is arrested or advanced by either penetrating or deflecting along the EBC/sub...
متن کاملEnhancement of toughness and wear resistance in boron nitride nanoplatelet (BNNP) reinforced Si3N4 nanocomposites
Ceramics have superior hardness, strength and corrosion resistance, but are also associated with poor toughness. Here, we propose the boron nitride nanoplatelet (BNNP) as a novel toughening reinforcement component to ceramics with outstanding mechanical properties and high-temperature stability. We used a planetary ball-milling process to exfoliate BNNPs in a scalable manner and functionalizes ...
متن کاملOn the Effect of Local Grain-Boundary Chemistry on the Macroscopic Mechanical Properties of a High Purity Y2O3-Al2O3-Containing Silicon Nitride Ceramic
The effects of grain-boundary chemistry on the mechanical properties of a high-purity silicon nitride ceramics were investigated, with specific emphasis on the role of oxygen. Variations in the grain-boundary oxygen content, through control of oxidizing heat treatments and sintering additives, was found to result in a transition in fracture mechanism from transgranular to intergranular fracture...
متن کامل