Cross Flow Sampler Fouling Index
نویسندگان
چکیده
منابع مشابه
Comparison of Fouling Detection between a Physical Method and a Black Box Model
The paper presents two methods that are aimed at detecting fouling in cross-flow heat exchangers under normal operating conditions, using measurements that can easily be obtained, i.e. inlet and outlet temperatures and the mass flows of the hot and cold fluids. The methods are a) a physical method that is based on number of transfer units (NTU) relations and b) a black box model that is estimat...
متن کاملCross-flow microfiltration of wine: Effect of colloids on critical fouling conditions
Critical fouling conditions were studied during wine cross-flow microfiltration using a multichannel ceramic membrane (0.2 mm). The aim was to determine critical operating conditions in order to limit fouling caused by wine colloids (tannins, pectin and mannoproteins) and enhance process performances. The method used is a square wave filtration based on the determination of the reversibility an...
متن کاملFlow analysis and fouling on the patterned membrane surface
One of the key issues in membrane technology is to avoid fouling which is formed on the membrane surface. To get over this trouble, the use of a patterned surface was suggested as a way to reduce fouling. In this report, both the experimental and numerical studies were performed with a prism patterned membrane system. In our experiments, we observe the local distribution of microbials; more fou...
متن کاملApplication of Cross-Flow Electro-Microfiltration in Chromium Wastewater Treatment
Cross-flow microfiltration (CFMF) was experimentaLLy studied for the separation of precipitates of chromium hydroxide. Although this process enables one to obtain chromium-free filtrate, a disadvantage is that the filtration flux declines rapidly due to membrane fouling. In order to avoid this fouling problem and increase the filtration flux, an electric field was applied across the membrane as...
متن کاملEvaluation of the importance of various operating and sludge property parameters to the fouling of membrane bioreactors.
A single-fibre microfiltration system was employed to investigate the importance of various operating and sludge property parameters to the membrane fouling during sludge filtration. The sludge was obtained from a submerged membrane bioreactor (SMBR). A series of comparative and correlative filtration and fouling tests were conducted on the influence of the operating variables, sludge propertie...
متن کامل