Experimental data on the properties of polymer-modified cement grouts using epoxy and acrylic resin emulsions
نویسندگان
چکیده
The use of additives to improve the quality of cement grouts is crucial for civil engineering, especially in foundation construction. This article presents experimental data concerning the compressive strength, elastic modulus, bleeding and injectability of microfine cement grouts modified with epoxy and acrylic resin emulsions. Strength properties were obtained at different curing ages. For further analysis and detailed discussion of properties of polymer-modified cement grouts, see "Fundamental properties of epoxy resin-modified cement grouts" (C.A. Anagnostopoulos, G. Sapidis, E. Papastergiadis, 2016) [1].
منابع مشابه
Preparation and Evaluation of Epoxy-Clay Nanocomposite Coatings for Corrosion Protection
Polymer-clay nanocomposite coatings have attracted much attention because of impressive enhancements of coating properties. In this research, both commercially available and isophoronediamine-modified montmorillonite clays were used to obtain epoxy-clay nanocomposite coatings. These nanocomposite materials with different clay loadings in the form of coatings were applied to cold-rolled steel (C...
متن کاملInvestigating the Effect of Modifier Chain Length on Insulation Properties of Polysulfide Modified Epoxy Resin
Polysulfide resins,with trade name of G4 and G112, with short and long chain lengths respectively, were used as reactive modifiers to toughen epoxy resin. The effects of molecular weights of G4 and G112 on impact resistance, dielectric constant, thermal conductivity as well as decomposition heat and adhesion properties of toughened epoxy were investigated. The impact strength and the diel...
متن کاملInvestigating of Factors Affecting the Corrosion Protection of Epoxy Primer containing Calcium Hydrogen Orthophosphate and Nano Silica Using Taguchi Method
The current essay analyzes the anti-corrosion properties of epoxy primers including anti-corrosion pigment calcium hydrogen orthophosphate and hydrophobic nano silica with various percentages optimized by Taguchi experimental design. The impact of influential factors such as the percentage of anti-corrosion pigments, percentage of nano silica and pigment to binder ratio on anti-corrosion proper...
متن کاملAntibacterial effect of glass ionomer cement and resin cement on cariogenic bacteria of Streptococcus mutans, Lactobacillus acidophilus and Streptococcus sobrinus
Background and Aim: the study of antibacterial properties of resin cements and modified glass ionomers is of great importance. The aim of this study was to determine the antibacterial effect of resin-modified glass ionomers and resin cements on cariogenic bacteria, Streptococcus mutans, Streptococcus sabrinus and Lactobacillus acidophilus. Materials and Methods:In this experimental laboratory s...
متن کاملShear bond strength evaluation of resin composite to resin-modified glass-ionomer cement using three different resin adhesives vs. glass-ionomer based adhesive
Background: The clinical success of sandwich technique depends on the strength of resin-modified glass ionomer cement (RMGIC) bonding to both dentin and resin composite. Therefore, the shear bond strength (SBS) of resin composite bonded to RMGIC utilizing different resin adhesives versus a GIC-based adhesive was compared. Materials and methods: In this in vitro study, 84 holes (5×2 mm) were pre...
متن کامل