Boundary Layer Control at Upstream Casing Wall of Impeller Inlet to Improve Performance Characteristics of Turbomachinery
نویسنده
چکیده
S Taka.haru TANAKA Department of Mechanical Engineering,
منابع مشابه
Large-eddy simulation of turbulent flow over an array of wall-mounted cubes submerged in an emulated atmospheric boundary-layer
Turbulent flow over an array of wall-mounted cubic obstacles has been numerically investigated using large-eddy simulation. The simulations have been performed using high-performance computations with local cluster systems. The array of cubes are fully submerged in a simulated deep rough-wall atmospheric boundary-layer with high turbulence intensity characteristics of environmental turbulent fl...
متن کاملUnsteady Numerical Simulations of the Flow Related to the Unstable Energy-discharge Characteristic of a Medium Specific Speed Double Suction Pump
Regions of positive slope in the pressure-discharge characteristics can result in a reduction or even lack of damping of system instabilities. They are therefore one of the major concerns in design and operation of centrifugal pumps as they are limiting the admissible operating range. The considered preliminary hydraulic design of an industrial double suction pump of medium specific speed ν = 0...
متن کاملC.P. No. i335 PROCUREMENT EXECUTIVE, MINISTRY OF DEFENCE AERONAUTICAL RESEARCH COUNCIL CURRENT PAPERS Measurements of Secondary Loss in a Model Turbine with Variable Inlet Boundary Layer
SUMMARY Detailed measurements have been made of the casing boundary layer flow before and after the nozzle blades of a single stage model air turbine. The measurements were made with the natural casing inlet boundary layer and two artificially thickened boundary layers. The results differ considerably from those usually obtained in two dimensional cascades. There was no sign of the usual second...
متن کاملFlow Instabilities in Cavitating and Non-Cavitating Pumps
It is well known that flow instabilities called rotating stall and surge may occur in non-cavitating turbomachines at flow rates smaller than design. Rotating stall is a local instability at the turbomachinery which is basically not dependent on the hydraulic system in which the turbomachine is installed. The stalled region rotates faster than impeller. Surge is a system instability in a hydrau...
متن کاملAn Innovation in Film Cooling of the Gas Turbine Blades Applying an Upstream Jet
A new design concept is introduced to control the near-wall integration between the hot-gas boundary layer and the cooling jets in order to enhance the adiabatic film cooling effectiveness of the gas turbine blades. In this new approach, another film cooling port, having a very low blowing ratio, which prevents formation of the counter-rotating vortex pare, is applied just upstream of the main ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2014