Research on Defects Inspection of Solder Balls Based on Eddy Current Pulsed Thermography
نویسندگان
چکیده
In order to solve tiny defect detection for solder balls in high-density flip-chip, this paper proposed feasibility study on the effect of detectability as well as classification based on eddy current pulsed thermography (ECPT). Specifically, numerical analysis of 3D finite element inductive heat model is generated to investigate disturbance on the temperature field for different kind of defects such as cracks, voids, etc. The temperature variation between defective and non-defective solder balls is monitored for defects identification and classification. Finally, experimental study is carried on the diameter 1mm tiny solder balls by using ECPT and verify the efficacy of the technique.
منابع مشابه
Stress Measurement Using Pulsed Eddy Current Thermography
This paper reports a noncontact inspection method, using Pulsed Eddy Current (PEC) stimulated thermography, for the evaluation of the anisotropic dependency of electrical conductivity of steel exposed to tensile stress. This method combines microscope lens based thermography with PEC using a rectangular excitation coil, giving directional excitation, to infer the electromagnetic properties vari...
متن کاملSignal Reconstruction and Feature Extraction of Pulsed Eddy Current Thermography for Aerospace Composites
Pulsed eddy current (PEC) stimulated thermography is proposed as a powerful non-destructive evaluation (NDE) technique, allowing the operator to observe the heating developed from the eddy current distribution in a structure using infrared imaging, detecting defects over a relatively wide area within a short time. Some defects (impact, delamination, disbond or crack) commonly occur in aerospace...
متن کاملOptimal SQUID based non-destructive test for detecting sub-surface defects with the help of advanced SQUID superconducting sensors and an experimental approach for optimal production method of these sensors from the YBCO superconductor materials
The conventional eddy current method for non-destructive inspection of welding joints has limitations that can examine defects to a certain depth below the surface of the sample and is not suitable for determining deep defects. This limitation can be overcome using the SQUID superconducting sensors. The nonstoichiometric composition of YBCO due to its superconducting temperature and desired cri...
متن کاملOptimal SQUID based non-destructive test for detecting sub-surface defects with the help of advanced SQUID superconducting sensors and an experimental approach for optimal production method of these sensors from the YBCO superconductor materials
The conventional eddy current method for non-destructive inspection of welding joints has limitations that can examine defects to a certain depth below the surface of the sample and is not suitable for determining deep defects. This limitation can be overcome using the SQUID superconducting sensors. The nonstoichiometric composition of YBCO due to its superconducting temperature and desired cri...
متن کاملElectromagnetic pulsed thermography for natural cracks inspection
Emerging integrated sensing and monitoring of material degradation and cracks are increasingly required for characterizing the structural integrity and safety of infrastructure. However, most conventional nondestructive evaluation (NDE) methods are based on single modality sensing which is not adequate to evaluate structural integrity and natural cracks. This paper proposed electromagnetic puls...
متن کامل