A Thermoelectric Generator Manufacture Research Based on Oscillating-Flow Heat Pipe Technology

نویسندگان

  • Jieting Wei
  • Yu Gu
  • Yang Liu
چکیده

Oscillating heat pipe is a new type of heat transfer. It not only has simple structure, non-pollution and low maintenance cost, but also has high heat transfer efficiency. Semiconductor thermoelectric generation technology is also an environmental technology. This article combines these two kinds of technology. By means of this generate electricity way, we make a set of system and the related experiment. Then we do some research on the feasibility of this system.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Modeling of A Single Turn Pulsating Heat Pipe based on Flow Boiling and Condensation Phenomena

Demand for high-performance cooling systems is one of the most challenging and virtual issues in the industry and Pulsating heat pipes are effective solutions for this concern. In the present study, the best predictor correlations of flow boiling and condensation are taken into account to model a single turn pulsating heat pipe mathematically. These considerations, result in derivation of more ...

متن کامل

Fluid flow and heat transfer characteristics in a curved rectangular duct using Al2O3-water nanofluid

In the present research, the laminar forced convective heat transfer and fluid flow characteristics for Al2O3-water nanofluid flowing in different bend (i.e., 180o and 90o) pipes have been investigated numerically in a three-dimensional computational domain using the finite volume technique. The effects of different pertinent parameters, such as the Reynolds number of the duct, volume fraction ...

متن کامل

The Effect of Aperture Size on the Cavity Performance of Solar Thermoelectric Generator

   In this manuscript, a solar cavity packed with thermoelectric generator modules is investigated numerically. The hot plate of TEG modules make the inner surface of the cube, and the cold plate is outside of the cavity, under natural convection. The TEG modules are electrically in series. The solution algorithm using the equations of heat transfer and generated power of TEG modules is d...

متن کامل

Concepts for medium-high to high temperature thermoelectric heat-to-electricity conversion: a review of selected materials and basic considerations of module design

Within the last decade, novel materials concepts and nanotechnology have resulted in a great increase of the conversion efficiency of thermoelectric materials. Despite this, a mass market for thermoelectric heat-to-electricity conversion is yet to be opened up. One reason for this is that the transfer of the lab records into fabrication techniques which enable thermoelectric generator modules i...

متن کامل

Research on Engine Exhaust Energy Recovery by a Heat Pipe Exchanger with a Semiconductor Thermoelectric Generator

A heat pipe exchanger was adopted to recover the engine exhaust energy and its internal gas pressure. Velocity and temperature distribution were obtained with the computational fluid dynamics software called ‘FLUENT’. Based on the simulation results, the structure of the exchanger was improved, and its working performance was verified by experiments. The experiments showed that the pressure los...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013