Evaluation of the maximum beyond-use-date stability of regular human insulin extemporaneously prepared in 0.9% sodium chloride in a polyvinyl chloride bag

نویسندگان

  • Megan A Rocchio
  • Caryn D Belisle
  • Bonnie C Greenwood
  • Michael C Cotugno
  • Paul M Szumita
چکیده

BACKGROUND Regular human insulin 100 units added to a sufficient quantity of 0.9% sodium chloride, to yield a total volume of 100 mL within a polyvinylchloride bag, is accepted to be stable for 24 hours due to physical denaturation and chemical modification. The objective of this study was to evaluate the extended stability of such extemporaneously prepared regular human insulin, stored under refrigeration, to the maximum beyond-use-date allowed by United States Pharmacopeia chapter 797. METHODS At time "0" three admixtures of regular human insulin were prepared by withdrawing 1 mL of regular human insulin with a concentration of 100 units/mL and adding it to a sufficient quantity of 0.9% sodium chloride for injection in a polyvinylchloride bag to yield a total volume of 100 mL. The three admixtures were stored under refrigeration (2°C-8°C [36°F-46°F]), and one sample of each admixture was withdrawn and tested in duplicate at 0, 6, 24, 48, 72, 144, 168, 192, 216, 240, 312, and 336 hours. Utilizing high performance liquid chromatography, each sample underwent immediate testing. The time points were stable if the mean concentration of the samples exceeded 90% of the equilibrium concentration at 6 hours. RESULTS The equilibrium concentration was 0.89 units/mL. Time points were stable if the mean concentration was at least 0.80 units/mL. All time points retained at least 90% of the equilibrium concentration, with the exception of hour 168 (0.79 ± 0.03 units/mL). At 192 hours the mean concentration was 0.88 ± 0.03 units/mL. At 336 hours the mean concentration was 0.91 ± 0.02 units/mL. CONCLUSION Based on these results, regular human insulin 100 units added to 0.9% sodium chloride for injection in a polyvinylchloride bag to yield a total volume of 100 mL is stable for up to 336 hours when stored at 2°C-8°C (36°F-46°F).

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Extended Stability of Sodium Phosphate Solutions in Polyvinyl Chloride Bags.

BACKGROUND Sodium phosphate injection is used to treat moderate to severe hypophosphatemia. There have been no published reports documenting the physical compatibility or chemical stability of sodium phosphate injection in IV solutions. OBJECTIVE To evaluate the physical compatibility and chemical stability of 30 and 150 mmol/L solutions of phosphate, prepared from sodium phosphate injection,...

متن کامل

A Pilot Chemical and Physical Stability Study of Extemporaneously Compounded Levetiracetam Intravenous Solution.

Levetiracetam is a commonly used antiepileptic medication for tumor-related epilepsy. However, the 100 mL intravenous (IV) infusion volume can be burdensome to imminently dying hospice patients. A reduced infusion volume would improve patient tolerability. The purpose of this study was to evaluate the stability of 1000 mg/25 mL (40 mg/mL) levetiracetam IV solution in sodium chloride 0.9%. We pr...

متن کامل

Stability of diluted adenosine solutions in polyvinyl chloride infusion bags.

PURPOSE The stability of diluted adenosine solutions in polyvinyl chloride infusion bags was studied. METHODS Adenosine 50-, 100-, and 220-μg/mL solutions were prepared in 50-mL polyvinyl chloride (PVC) infusion bags containing 0.9% sodium chloride injection or 5% dextrose injection and stored at room temperature (23-25 °C) or under refrigeration (2-8 °C). Each sample of every combination of ...

متن کامل

Synthesis and Characterization of Cation Exchange PVA-g-PAA/PBI sulfone Membrane for the Electrolysis of Sodium Chloride

The reported work is on the preparation and characterization of polyvinyl alcohol -g- Polyacrylic acid (PVA-g-PAA)/ Polybenzimidazole sulfone (PBIs) cation exchange membrane used for the electro dialysis of sodium chloride solution. The polymer syrup has been prepared using the grafting method with the help of polyvinyl alcohol and polyacrylic acid in the presence of water solvent. The polymer ...

متن کامل

Stability of Melphalan in 0.9 % Sodium Chloride Solutions Prepared in Polyvinyl Chloride Bags for Intravenous Injection

Melphalan is an alkylating agent frequently used in an intravenous formulation to treat hematologic malignancies and solid tumors in both adults and children. According to the manufacturer, melphalan is stable in sterile 0.9% sodium chloride for 90 min at room temperature (RT). Several authors have studied the stability of different concentrations of melphalan; however, most were not adapted to...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 6  شماره 

صفحات  -

تاریخ انتشار 2013