Dually functional, N-doped porous graphene foams as counter electrodes for dye-sensitized solar cells.

نویسندگان

  • Long Song
  • Qiang Luo
  • Fei Zhao
  • Yang Li
  • Hong Lin
  • Liangti Qu
  • Zhipan Zhang
چکیده

A series of nitrogen-doped porous graphene foams (NPGFs) have been prepared by hydrothermally treating a mixed solution of graphite oxide (GO) and ammonia. The NPGFs are used as the counter electrode (CE) material for dye-sensitized solar cells (DSCs) in conjunction with the conventional iodide-based electrolyte and the recently developed sulfide-based electrolyte. Tafel-polarization tests and electrochemical impedance spectroscopic (EIS) measurements confirmed that the NPGFs work efficiently in both electrolyte systems, and under air mass (AM) 1.5G 100 mW cm(-2) light illumination, optimal efficiencies of 4.5% and 2.1% were obtained for the iodide-based electrolyte and sulfide-based electrolyte, respectively. To the best of our knowledge, this is the first study on N-doped graphene CEs in conjunction with sulfide-based electrolytes and therefore, the current results are deemed to provide new insights into developing novel low-cost and metal-free CEs for DSCs.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Boron-doped graphene as a high-efficiency counter electrode for dye-sensitized solar cells.

Boron-doped graphene, synthesized by annealing a mixture of graphite oxide and B2O3, has shown a high conversion efficiency of 6.73% as a counter electrode (CE) for dye-sensitized solar cells, which is better than the Pt CE.

متن کامل

Nitrogen-doped graphene foams as metal-free counter electrodes in high-performance dye-sensitized solar cells.

Owing to their low-cost production, simple fabrication, and high energy conversion efficiency, dye-sensitized solar cells (DSSCs) have attracted much attention since Oregan and Gr tzel s seminal report in 1991. A typical DSSC device consists of a dye-adsorbed TiO2 photoanode, counter electrode, and iodide electrolyte. The counter (cathode) electrode plays a key role in regulating the DSSC devic...

متن کامل

Recent development of carbon nanotubes materials as counter electrode for dye-sensitized solar cells

Dye-sensitized solar cells present promising low-cost alternatives to the conventional Silicon (Si)-based solar cells. The counter electrode  generally consists of Pt deposited onto FTO plate. Since Pt is rare and expensive metal, nanostructured carbonaceous materials have been widely investigated as a promising alternative to replace it. Carbon nanotubes  have shown significant properties such...

متن کامل

Comparison of Transparent Nickel Doped Cobalt Sulfide and Platinum Counter Electrodes Used in Quasi-Solid State Dye Sensitized Solar Cells

Transparent nickel doped cobalt sulfide was fabricated on a SnO2:F electrode and tested as an efficient electrocatalyst and as an alternative to the expensive platinum counter electrode. In order to investigate how this electrode could affect the electrical characteristics of a dye-sensitized solar cell, we manufactured cells with the same TiO2 photoanode sensitized with dye (N719) and employin...

متن کامل

p-Doped three-dimensional graphene nano-networks superior to platinum as a counter electrode for dye-sensitized solar cells.

We report CVD-grown p-doped three-dimensional graphene nano-networks (3D-GNs) that provide superior performance to Pt as a counter electrode material in dye sensitized solar cells (DSSCs). The 3D-GN based DSSC exhibits a maximum photoconversion efficiency of 8.46%, which is 6.01% greater than that exhibited by Pt based DSSCs.

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Physical chemistry chemical physics : PCCP

دوره 16 39  شماره 

صفحات  -

تاریخ انتشار 2014