Transmitting Conditions of Cable Tree
نویسندگان
چکیده
Research and development of Spectrum Administration for metallic access networks analyzed possibilities of matrix representation for transmission circumstances. Some interesting remarks were gained as a side output of this work.
منابع مشابه
A Mixed Integer Programming Approach to Optimal Feeder Routing for Tree-Based Distribution System: A Case Study
A genetic algorithm is proposed to optimize a tree-structured power distribution network considering optimal cable sizing. For minimizing the total cost of the network, a mixed-integer programming model is presented determining the optimal sizes of cables with minimized location-allocation cost. For designing the distribution lines in a power network, the primary factors must be considered as m...
متن کاملControl of Scour Around the Piles with Using Cable and Collar at the River
In this study, in order to examine the joint of the cable and the collar in control of scour around the bridge piles, experiments were carried out in a rectangular plexiglass flume as a direct path. The experiments were carried out using three different cable diameters, three different thread angles and three rounds of the cable threaded at a steady current in clear water. The results of this s...
متن کاملInnovative approach to strata reinforcement in coal mines with reference to evaluation cable bolts shear strength
There is an increasing need to determine accurately the strength properties of tendons for an effective ground control on mines and underground structures as well as on modelling simulations. The strength properties of cables, used as cable bolts, have been evaluated mainly by their ultimate tensile strength, as this kind of test can be carried out in the field as well as in the laboratory. Onl...
متن کاملتخمین عمر عایقی کابل های فشار قوی XLPE تحت تنش های حرارتی، الکتریکی و همزمان
The aging of insulating materials can be estimated by an electrical breakdown occurring in electrical components so that the relationship between lifetime, failure probability and reliability of electrical components may be studied using the life models in high voltage cables networks. In last decades with attention to higher features as electrical, thermal, mechanical characteristic, widely cr...
متن کاملJitter Measurements
The TTCrx mezzanine card was installed on the Clock and Control Board [2] and connected to a TTCvx module via a 100 m optical cable. The TTCvx provided the 40.00 Mhz clock source for the TTCvi module. Measurements were conducted while repeatedly transmitting two broadcast (BC) commands over channel B and L1 Accept over channel A (case 1) and then again without the BC commands / L1 Accepts (case...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2007