Experimental investigation of the physical mechanisms governing the spread of wildfires

نویسندگان

  • Frédéric Morandini
  • Xavier Silvani
چکیده

11 One of the objectives of the present study is to gain a deeper understanding of the heat 12 transfer mechanisms that control the spread of wildfires. Five experimental fires were 13 conducted in the field across on plots of living vegetation. The lengths of the ignition lines 14 were set in the range of 20–30 m to reproduce wildfire front conditions as closely as possible. 15 The experiments were performed under various vegetation properties, wind conditions and 16 plot topography to highlight different fire spread behaviours. This study focused on 17 characterising heat transfer ahead of the flame front. The temperature and heat flux were 18 measured at the top of the vegetation as the fire spread. The results showed the existence of 19 two different fire spread regimes that were either dominated by radiation or governed by 20 mixed radiant-convective heat transfer. For plume-dominated fires, the flow strongly responds 21 to the great buoyancy forces generated by the fire; this guides the fire plume upward. For 22 wind-driven fires, the flow is governed by inertial forces due to the wind, and the fire plume 23 is greatly tilted towards unburned vegetation. The correlations of the temperature (ahead of 24 the flame front) and wind velocity fluctuations change according to the fire regime. The 25 longitudinal distributions of the radiant heat flux ahead of the fire front are also discussed. 26 The data showed that neither the convective Froude number nor the Nelson convection 27

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Kinetic Monte Carlo Simulation of Oxalic Acid Ozonationover Lanthanum-based Perovskitesas Catalysts

Kinetic Monte Carlo simulation was applied to investigation of kinetics and mechanism of oxalic acid degradation by direct and heterogeneous catalytic ozonation. La-containing perovskites including LaFeO3, LaNiO3, LaCoO3 and LaMnO3 was studied as catalyst for oxalic acid ozonation. The reaction kinetic mechanisms of each abovementioned catalytic systems has been achieved. The rate constants val...

متن کامل

Experimental and Neural Network Prediction of Elongation and Spread after First Stage of Fullering

Fullering process is a type of open die forging. In this research, elongation and maximum sideways spread in final shape of a billet after the first blow of a fullering process are predicted by designing a back propagation multilayer perceptron neural network. Several experiments are conducted using lead as the model material. Billets with three different square cross-sections are used in these...

متن کامل

Metallography Investigation of Thermal Wave Control by Magneto-Static Field

In this paper we have studied the effect of magneto-static field onpropagation of thermal wave generated in metal by pulsed laser. In fact this interactiongenerate acoustic wave in different mechanisms. However, always the commonmechanism in the interactions of laser pulse and metal is the thermo-elastic wavegeneration. Applying the suitable magneto-static field on the s...

متن کامل

An Investigation into the Pull-out Failure Mechanisms of Suction Caissons

This paper reports results from an investigation into the suction caissons failure mechanisms under vertical pull-out loads. An insight to the failure mechanisms of suction caissons paves the path for developing analytical solutions to their pull-out capacity. The numerical models of suction caissons have first been calibrated by and verified against several experimental data from other researc...

متن کامل

Analyzing Effect of Friction on Spread and Budge in Flat Rolling by FEM Method

In this research a final element model for simulating three dimensional deformation in rolling of flat product is modeling in ABAQUS and further developed to study the frictional effects on spread and bulge. To predict the magnitude of bulging , the rolling process is approximated by successive forging steps. The elongation or the average spread at each step from the previous calculations are u...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017