Second Order Surface Analysis
نویسنده
چکیده
Results from analyzing the curvature of a surface can be used to improve the implementation, e ciency, and e ectiveness of manufacturing and visualization of sculptured surfaces. In this paper, we develop a robust method using hybrid symbolic and numeric operators to create trimmed surfaces each of which is solely convex, concave, or saddle and partitions the original surface. The same method is also used to identify regions whose curvature lies within prespeci ed bounds.
منابع مشابه
Analytic Solution for Hypersonic Flow Past a Slender Elliptic Cone Using Second-Order Perturbation Approximations
An approximate analytical solution is obtained for hypersonic flow past a slender elliptic cone using second-order perturbation techniques in spherical coordinate systems. The analysis is based on perturbations of hypersonic flow past a circular cone aligned with the free stream, the perturbations stemming from the small cross-section eccentricity. By means of hypersonic approximations for the ...
متن کاملOptimization of Nusselt Number of Al2O3/Water Nanofluid Using Response Surface Methodology
This study has primarily aimed at the examination of the effect of flow rate, solid volume fraction and their interactions on the Nusselt number of Al2O3/water nanofluids. To investigate the main and interaction effects on the response, Response Surface Methodology (RSM) has been used based on the miscellaneous design. By using the analysis of variance (ANOVA) the signi...
متن کاملOptimization and kinetic evaluation of acid blue 193 degradation by UV/peroxydisulfate oxidation using response surface methodology
The optimization of process conditions for the degradation of Acid Blue 193 by UV/peroxydisulfate was investigated using response surface methodology (RSM). The effects of four parameters namely initial K2S2O8 concentration, UV irradiation, temperature, and initial dye concentration on two process responses, color removal and the rate constants of the first-order kinetic equations, were investi...
متن کاملFitting Second-order Models to Mixed Two-level and Four-level Factorial Designs: Is There an Easier Procedure?
Fitting response surface models is usually carried out using statistical packages to solve complicated equations in order to produce the estimates of the model coefficients. This paper proposes a new procedure for fitting response surface models to mixed two-level and four-level factorial designs. New and easier formulae are suggested to calculate the linear, quadratic and the interaction coeff...
متن کاملOsmotic dehydration of anchovy fillets in salt solution: Optimization by using statistical experimental design
Anchovy fillets that had undergone osmotic dehydration and response surface methodology (RSM) were used to determine the influence and optimal values of the process variables. Also the optimal processing conditions were determined in order to reduce the solid gain and water loss ratio (SG/WL) and firmnessfor the anchovy fillets. A three-levelcentral composite rotatabledesign (CCRD) involving th...
متن کاملResponse Surface Methodology for Optimizing Adsorption Process Parameters of Amaranth Removal Using Magnetic Layer Double Hydroxide (Fe3O4/ZnFe-LDH)
ABSTRACT Response surface methodology was employed to optimize the adsorption parameters of Amaranth onto magnetic layer double hydroxide (Fe3O4/ZnFe-LDH). Such optimization was undertaken to ensure a high efficiency over the experimental ranges employed, and to evaluate the interactive effects of the initial concentration of Amaranth, pH, adsorbent dosage, temperature and contact time on...
متن کامل