Identification of Pathway Fiber Orientation
نویسندگان
چکیده
The ability to record accessory atrioventricular (AV) pathway activation consistently may be uniquely beneficial in improving pathway localization, identifying anatomic relations, and providing insight into unusual conduction properties. For the purpose of recording left AV accessory pathway activation, an electrode catheter was specially designed for use in the coronary sinus. The orthogonal catheter has three sets of four electrodes spaced evenly around the circumference. Electrograms were recorded at low gain (<1 cm/mV) between adjacent electrodes on the same set (interelectrode distance, 1.5 mm, center to center). This provides a recording dipole perpendicular to the atrioventricular groove to enhance recording of accessory pathway activation while miinimizing overlapping atrial or ventricular potentials. The orthogonal electrode catheter was used in the electrophysiological study of 48 consecutive patients with 59 left AV accessory pathways. The catheter could be advanced along the coronary sinus beyond the site of earliest retrograde atrial activation in 49 of the 59 accessory pathways. Activation potentials were recorded from 45 of the 49 (92%) accessory pathways accessible to the catheter (5 of 5 anterior, 8 of 8 anterolateral, 15 of 16 lateral, 5 of 5 posterolateral, 5 of 5 posterior, and 7 of 10 posteroseptal). Accessory pathway potentials were validated by dissociating them from both atrial and ventricular activation by programmed-stimulation techniques. During surgery, accessory pathway potentials were identfied from orthogonal catheter electrodes in the coronary sinus in 14 of 16 accessory pathways (12 patients). Epicardial mapping confirmed the location of the accessory pathway, and direct pressure over the orthogonal catheter electrode that recorded the accessory pathway potential resulted in transient conduction block in nine of the 14 accessory pathways. Orthogonal electrode maps of the coronary sinus identified an oblique course in 39 of 45 recorded accessory pathways. Thirty-two of 38 left free-wall accessory pathways were oriented with atrial insertion 4-30 mm (median, 14 mm) proximal (posterior) to the ventricular insertion. In the remaining six free-wail accessory pathways, the lateral excursion could not be determined because either only the atrial end of the accessory pathway was recorded or activation of multiple pathway fibers prevented tracking of individual strands. The seven recorded posteroseptal pathways exhibited accessory pathway potentials throughout an 8-18-mm (median, 10 mm) length of the proximal coronary sinus, but fiber orientation was difficult to determine. We conclude that left AV accessory pathway activation can be recorded consistently from orthogonal catheter electrodes in the coronary sinus. Direct accessory pathway recordings revealed an oblique fiber orientation and may provide more precise loalization for surgical or catheter ablation. (Circulation 1988;78:598-610)
منابع مشابه
Investigation of Buckling Analysis of Epoxy/ Nanoclay/ Carbon Fiber Hybrid Laminated Nanocomposite: Using VARTM Technique for Preparation
In the current study the effect of nanoclay content and carbon fiber orientation on the buckling properties of epoxy/nanoclay/ carbon fiber orientation is investigated. Buckling samples were prepared with 1, 3 and 5 wt% of nanoclay and 0, 30 and 45 degrees of fiber orientations based on VARTM technique. The results obtained from the buckling tests showed that adding 1wt% of nanoclay into the pu...
متن کاملStiffness Prediction of Beech Wood Flour Polypropylene Composite by using Proper Fiber Orientation Distribution Function
One of the most famous methods to predict the stiffness of short fiber composites is micromechanical modeling. In this study, a Representative Volume Element (RVE) of a beech wood flour natural composite has been designed and the orientation averaging approach has been utilized to predict its stiffness tensor. The novelty of this work is in finding the proper fiber orientation distribution func...
متن کاملFree Vibrations of Continuous Grading Fiber Orientation Beams on Variable Elastic Foundations
Free vibration characteristics of continuous grading fiber orientation (CGFO) beams resting on variable Winkler and two-parameter elastic foundations have been studied. The beam is under different boundary conditions and assumed to have arbitrary variations of fiber orientation in the thickness direction. The governing differential equations for beam vibration are being solved using Generalized...
متن کاملIntroducing A New Mathematical Model and Developing A Computer Package For 3-D Machining of Fiber Reinforced Polymer Composites
Due to the widespread applications of fiber reinforced polymer composites in various industries, the machining of these materials to reach the desired shapes, close tolerances and surface finish quality is of great importance. But the composite materials are anisotropic and are mostly prepared in laminated form and, therefore, they have special chip formation behaviour. Among the effective para...
متن کاملIntroducing A New Mathematical Model and Developing A Computer Package For 3-D Machining of Fiber Reinforced Polymer Composites
Due to the widespread applications of fiber reinforced polymer composites in various industries, the machining of these materials to reach the desired shapes, close tolerances and surface finish quality is of great importance. But the composite materials are anisotropic and are mostly prepared in laminated form and, therefore, they have special chip formation behaviour. Among the effective para...
متن کامل