An Advanced Control Method for Inductive Load of Z-Source Inverter
نویسنده
چکیده
In this paper, the operation principle of the Z-source inverter is analysed in detail. According to the characteristics of allowed short–shrougt zero state in the Z-source inverter, SPWM control method of the Zsource inverter is obtained by inserting fixed short–shrougt zero state into zero state of SPWM. It is simple and easily implemented in practice. However, in inductive load condition the output voltage and current of Z-source inverter have serious distortion and affect the inverting quality. The cause of this distortion is analysed in detail and an improved SPWM control method is proposed, which can better solve the output voltage and current distortion problem of the Z-source inverter under the condition of inductive load. Matlab simulation results verify that the improved SPWM control method not only eliminates distortion caused by inductive load, but also decreases the switch times and quantities in each cycle. Therefore, it decreases the THD of AC output effectively and improves the efficiency of the inverter, and its theoretical analysis is verified to be effective. Keywords-Z-source, inverter, SPWM, the shoot–shrougt zero state, inductive load, voltage distortion
منابع مشابه
Harmonic Reduction Technique Using Flying Capacitor Based Z Source Inverter for a DVR
The Dynamic Voltage Restorer (DVR) is a commercially available, popular device to eliminate voltage sags and swells in the distribution lines. Its basic function is to inject the voltage difference (difference between the pre-sag and sag voltage) to the power line and maintains the pre-sag voltage condition in the load side. The efficiency of the DVR depends on the performance of the efficiency...
متن کاملA New Topology for Z-Source Inverter Based on Switched-Inductor and Boost Z-Source Inverter
In this paper, a new topology for boost Z-source inverterbased on switched-inductor cell is proposed. The operating modes of the proposed inverter are analyzed and also a suitable control method to generate the trigger signals of the inverter is presented. Having a common earth between the input source and inverter and capability to generate a higher voltage gain by using lower amounts of the d...
متن کاملEvaluating Technical Requirements to Achieve Maximum Power Point in Photovoltaic Powered Z-Source Inverter
One of the key challenges of employing photovoltaic systems is to extract maximum power of the panels. This problem is known as maximum power point tracking (MPPT) technique. The MPPT stands for establishing situation in which output power of the panels reaches its maximum allowable power. In this context, this paper is to assess the technical requirements to achieve maximum output power of a n...
متن کاملControlling Both the DC Boost and AC Output Voltage of Z-Source Inverter Using Neural Network Controller with Minimization of Voltage Stress Across Devices
This paper presents a method to control both the dc boost and the ac output voltage of Z-source inverter using neural network controllers. The capacitor voltage of Z-source network has been controlled linearly in order to improve the transient response of the dc boost control of the Z-source inverter. The peak value of the line to line ac output voltage is used to control and keep the ac output...
متن کامل