Investigation of neovascularization in three-dimensional porous scaffolds in vivo by a combination of multiscale photoacoustic microscopy and optical coherence tomography.

نویسندگان

  • Xin Cai
  • Yu Zhang
  • Li Li
  • Sung-Wook Choi
  • Matthew R MacEwan
  • Junjie Yao
  • Chulhong Kim
  • Younan Xia
  • Lihong V Wang
چکیده

It is a grand challenge to visualize and assess in vivo neovascularization in a three-dimensional (3D) scaffold noninvasively, together with high spatial resolution and deep penetration depth. Here we used multiscale photoacoustic microscopy (PAM), including acoustic-resolution PAM (AR-PAM) and optical-resolution PAM (OR-PAM), to chronically monitor neovascularization in an inverse opal scaffold implanted in a mouse model up to 6 weeks by taking advantage of the optical absorption contrast intrinsic to hemoglobin molecules in red blood cells. By combining with optical coherence tomography (OCT) based on optical scattering contrast, we also demonstrated the capability to simultaneously image and analyze the vasculature and the scaffold in the same mouse. The hybrid system containing OR-PAM and OCT offered a fine lateral resolution of ∼5 μm and a penetration depth of ∼1 mm into the scaffold/tissue construct. AR-PAM further extended the penetration depth up to ∼3 mm at a lateral resolution of ∼45 μm. By quantifying the 3D PAM data, we further examined the effect of pore size (200 vs. 80 μm) of a scaffold on neovascularization. The data collected from PAM were consistent with those obtained from traditional invasive, labor-intensive histologic analyses.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Prospects of photoacoustic tomography.

Commercially available high-resolution three-dimensional optical imaging modalities-including confocal microscopy, two-photon microscopy, and optical coherence tomography-have fundamentally impacted biomedicine. Unfortunately, such tools cannot penetrate biological tissue deeper than the optical transport mean free path (approximately 1 mm in the skin). Photoacoustic tomography, which combines ...

متن کامل

Multiscale photoacoustic microscopy of single-walled carbon nanotube-incorporated tissue engineering scaffolds.

Three-dimensional polymeric scaffolds provide structural support and function as substrates for cells and bioactive molecules necessary for tissue regeneration. Noninvasive real-time imaging of scaffolds and/or the process of tissue formation within the scaffold remains a challenge. Microcomputed tomography, the widely used technique to characterize polymeric scaffolds, shows poor contrast for ...

متن کامل

Three-dimensional combined photoacoustic and optical coherence microscopy for in vivo microcirculation studies.

Photoacoustic microscopy is predominantly sensitive to optical absorption, while optical coherence tomography relies on optical backscattering. Integrating their complementary contrasts can provide comprehensive information about biological tissue. We have developed a dual-modality microscope that combines the two for studying microcirculation. Three-dimensional imaging of microvasculature and ...

متن کامل

Development of an Advanced Optical Coherence Tomography System for Radiation Dosimetry

Introduction: According to the literature, optical coherence tomography (OCT) can be used measure radiation absorbed dose. This study was carried out to design a computed tomography system for the calculation of absorbed dose and optimization of dose delivery in radiotherapy using gel dosimeters. Material and Methods: An advanced charge-coupled device based OCT system was developed in laborator...

متن کامل

Investigation of pore-scale random porous media using lattice boltzmann method

The permeability and tortuosity of pore-scale two and three-dimensional random porous media were calculated using the Lattice Boltzmann method (LBM). Effects of geometrical parameters of medium on permeability and tortuosity were investigated as well. Two major models of random porous media were reconstructed by computerized tomography method: Randomly distributed rectangular obstacles in a uni...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Tissue engineering. Part C, Methods

دوره 19 3  شماره 

صفحات  -

تاریخ انتشار 2013