8T SRAM Cell Design for Dynamic and Leakage Power Reduction
نویسندگان
چکیده
This paper addresses a, novel eight transistor (8T) CMOS SRAM cell design to enhance the stability and to reduce dynamic and leakage power. For the validation of proposed 8T SRAM cell, compared results with reported data. The parameters used in the proposed cell are comparable to the existing 8T SRAM cell at same technology and design rules. The stability of the proposed cell has been analyzed using N-curve metrics. Write operation is achieved in the proposed 8T SRAM cell by charging / discharging single Bit Line (BL), which results in reduction of dynamic power consumption. The proposed 8T SRAM cell has achieved 38.33% dynamic power reduction and 25.31% reduction in leakage power comparing with the reported data of 8T SRAM cell, which validate the desired design approach.
منابع مشابه
A Modified 8-Transistor SRAM Cell Design with High Stability and Low Power Applications
SRAM occupies two-third area of VLSI chips, therefore it dominates the total power consumption. To enhance the performance of these chips, SRAM cell should meet the requirement of lesser power consumption. This paper presents a new 8T SRAM cell that is efficient in Dynamic power consumption in Write mode and Leakage power consumption when compared with referred 9T SRAM cell and standard 6T SRAM...
متن کاملLow Leakage Asynchronous PP based Single Ended 8T SRAM bit-cell at 45nm CMOS Technology
Low power SRAM memory designs has become challenging for portable device applications. Semiconductor/ VLSI industry growth has exponentially demanding low leakage power SRAM designs for high performance chips and microprocessors. To get optimized standard cell memory design for battery operated devices at deep sub micron CMOS technology, a low leakage Asynchronous 8T SRAM is proposed. In this p...
متن کاملDynamic Power Reduction in Sram
To reduce the dynamic power consumption in SRAM a new design technique is proposed here. The proposed technique is compared with 8T SRAM cell design technique using 0.18 micron technology. Simulation results indicates that the proposed technique provides an improvement of 64% in bitline leakage ,22.64% in write ‘0’ power, 30.68% in write ‘1’ power over 8T SRAM cell design technique.
متن کامل12th Int'l Symposium on Quality Electronic Design
Bias Temperature Instability (BTI) causes significant threshold voltage shift in MOSFET using Hafnium-dioxide (HfO2) High-k dielectric material. Negative BTI and Positive BTI are two types of BTI effects observed in p-channel and n-channel MOSFET. BTI affects the stability and reliability of conventional six transistor (6T) SRAM design in nano-scale CMOS technology. Eight transistor (8T) and Te...
متن کاملDesign and Verification of Low Power SRAM using 8T SRAM Cell Approach
SRAM cell stability will be a primary concern for future technologies due to variability and decreasing power supply voltages. Advances in chip designing have made possible the design of chips at high integration and fast performance. Lowering power consumption and increasing noise margin have become two central topics in every state of SRAM designs.The Conventional 6T SRAM cell is very much pr...
متن کامل