Interlaboratory Comparison on High-Temperature Superconductor Critical-Current Measurements
نویسندگان
چکیده
An extensive interlaboratory comparison was conducted on high temperature superconductor (HTS) critical-current measurements. This study was part of an international cooperative effort through the Versailles Project on Advanced Materials and Standards (VAMAS). The study involved six U.S. laboratories that are recognized leaders in the field of HTS. This paper includes the complete results from this comparison of critical-current measurements on Ag-sheathed Bi2Sr2Ca2Cu3O10-x (2223) tapes. The effects of sample characteristics, specimen mounting, measurement technique, and specimen damage were studied. The future development of a standard HTS measurement method is also discussed. Most of the evolution of this emerging technology has occurred in improvement of the performance of the conductors. The successful completion of this interlaboratory comparison is an important milestone in the evolution of HTS technology and marks a level of maturity that the technology has reached.
منابع مشابه
INVESTIGATION OF SUPERCONDUCTIVITY AND MAGNETIC PROPERTIES OF BI2SR2CA2CU3O10+Θ CERAMIC SUPERCONDUCTOR WITH ADDITION OF SILICON CARBIDE NANOPARTICLES
In this research, the effect of addition of silicon carbide (SiC) nanoparticles on the improvement of the structural, superconductivity, magnetic, and flux pinning properties of high-temperature superconductor Bi1.6Pb0.4Sr2Ca2Cu3O10+θ (Bi-2223) was investigated. The Bi-2223 ceramic superconductor was prepared using the sol-gel method, and silicon carbide nanoparticles were modified by Azobisiso...
متن کاملبررسی ابررسانای 2223 – Bi آلائیده با نانوذرات CdO
In this paper, the CdO nanoparticles were prepared by chemical reduction method. Then, the CdO nanoparticles were doped in the Bi1.64Pb0.36Sr2Ca2-xCdxCu3Oy with x = 0.0, 0.01, 0.02, 0.03, 0.04, 0.1 superconductor. The samples were synthesized by the standard solid-state reaction technique. The structural properties, microstructure and morphology of the samples have been studied by XRD, SEM a...
متن کاملابررسانای پایه بیسموت
In this paper, Bi-Sr-Ca-Cu-O (BCSCCO) system superconductor is made by the solid state reaction method. The effect of doping Pb, Cd, Sb, Cu and annealing time on the critical temperature and critical current density have been investigated. The microstructure and morphology of the samples have been studied by X-ray diffraction, scanning electron microscope and energy dispersive X-ray. The resu...
متن کاملOptimal SQUID based non-destructive test for detecting sub-surface defects with the help of advanced SQUID superconducting sensors and an experimental approach for optimal production method of these sensors from the YBCO superconductor materials
The conventional eddy current method for non-destructive inspection of welding joints has limitations that can examine defects to a certain depth below the surface of the sample and is not suitable for determining deep defects. This limitation can be overcome using the SQUID superconducting sensors. The nonstoichiometric composition of YBCO due to its superconducting temperature and desired cri...
متن کاملOptimal SQUID based non-destructive test for detecting sub-surface defects with the help of advanced SQUID superconducting sensors and an experimental approach for optimal production method of these sensors from the YBCO superconductor materials
The conventional eddy current method for non-destructive inspection of welding joints has limitations that can examine defects to a certain depth below the surface of the sample and is not suitable for determining deep defects. This limitation can be overcome using the SQUID superconducting sensors. The nonstoichiometric composition of YBCO due to its superconducting temperature and desired cri...
متن کامل