A Nonlinear Interface Element for 3D Mesoscale Analysis of Brick-Masonry Structures
نویسندگان
چکیده
This paper presents a novel interface element for the geometric and material nonlinear analysis of unreinforced brick-masonry structures. In the proposed modelling approach, the blocks are modelled using 3D continuum solid elements, while the mortar and brick-mortar interfaces are modelled by means of the 2D nonlinear interface element. This enables the representation of any 3D arrangement for brick-masonry, accounting for the in-plane stacking mode and the through-thickness geometry, and importantly it allows the investigation of both the in-plane and the out-of-plane response of unreinforced masonry panels. A co-rotational approach is employed for the interface element, which shifts the treatment of geometric nonlinearity to the level of discrete entities, and enables the consideration of material nonlinearity within a simplified local framework employing first-order kinematics. In this respect, the internal interface forces are modelled by means of elasto-plastic material laws based on work-softening plasticity and employing multi-surface plasticity concepts. Following the presentation of the interface element formulation details, several experimentalnumerical comparisons are provided for the in-plane and out-of-plane static behaviour of brick-masonry panels. The favourable results achieved demonstrate the accuracy and the significant potential of using the developed interface element for the nonlinear analysis of brick-masonry structures under extreme loading conditions.
منابع مشابه
Mesoscale Modelling of Masonry Structures using Mesh Tying
This paper presents an accurate and efficient computational strategy for the simulation of coupled masonry structures which combines a partitioned mesoscale modelling approach for brick-masonry components with a mortar mesh tying method for non-conforming interfaces. This allows the independent modelling of the individual structural components and the efficient tying of the subdomains with accu...
متن کاملForce Reduction Factor R for Shear Dominated Low-Rise Brick Masonry Structures
This paper presents investigation carried out, including experimental and numerical studies, on low-rise shear-dominated brick masonry structures for the calculation of force reduction factor R. Basic experimental tests were conducted on masonry constituent materials for mechancial characterization. In-plane quasi-static cyclic tests were conducted on twelve full scale brick masonry walls, to u...
متن کاملMicro-modeling of Masonry Infilled RC Moment Resisting Frames to Investigate Arrangement of Compressive Diagonal Struts
Accurate modeling of masonry has been a major concern of the researchers in the past decades. Besides reinforced and unreinforced masonry structures, masonry can be found in frame structures as infill panels which are used as partitions and/or external walls. These elements role as a part of structure and introduce a large degree of nonlinearity into the system. In this study, a micro-modeling ...
متن کاملAnalysis of Masonry Infill Panels Retrofitted with FRP Sheets in R/C Frames
Masonry infill walls are often used as non-structural elements. According to the past structural failure, ignorance of interaction between infill walls and enclosed frame may lead to the different seismic response for non-ductile building frames. The main contribution of this paper is to analytically investigate the behavior of reinforced concrete with masonry infill panels as participating str...
متن کاملSimulation of Masonry Beams Retrofitted with Engineered Cementitious Composites
A thin layer of ductile fiber-reinforced mortar material referred to as Engineered Cementitious Composites, or ECC has been experimentally investigated as a seismic retrofit for unreinforced masonry infill walls in non-ductile reinforced concrete frames. Compression tests of masonry prisms retrofitted with 13mm of ECC were conducted representing the compression strut of a masonry infill under i...
متن کامل