A Discussion and Classification of Subaqueous Mass-Transport with Particular Application to Grain. Flow, Slurry-Flow, and Fluxoturbidites
نویسنده
چکیده
Carter, R M, 1975 A discussion and classlfmatlon of subaqueous mass-transport with particular application to gram-flow, slurry-flow, and fluxoturbldltes Earth-Sci Rev, 11 145--177 Sediments will remmn at rest on the sea-floor provided forces of shear resistance exceed the downslope shear stress imposed by gravity The shear resmtance of granular water-saturated sediments IS dmcussed within the constraints imposed by the Coulomb model of shear failure, and the phenomena of thixotropy, liquefaction, retrogressive flow shdlng and fluidizatlon are discussed as mechanisms for producing the mass-mobllmation of sediment Processes of laminar mass-flow (= inertia flow) are broadly divided into those involving water as the interstitial fluid (gram-flow) and those having an interstitial fluid of enhanced viscosity (slurry-flow) Recent and experimental examples of inertiaflow are summarised and dmcussed under the headings gram-fall, grain-flow, slump-creep and fluxoturbldltes It is concluded that gram-flow and slump-creep deposits may be more widespread in the sedimentary record than present reports indicate It is recommended that the term fluxoturbIdite be restricted to its original sense, to describe the deposits of proximal turbldlteS in which the lmmediate|y pre-depositlonal transport was by inertia-flow A suggested terminology for subaqueous mass-transport processes and their products is summarmed in the form of a flow-chart, terminological distinction being drawn between the processes of mobllmatlon, transport and deposition of the sediment, and between the various sedimentary beds or facies that result from emplacement by mass-transport
منابع مشابه
Sealers Bay submarine fan complex, Oligocene, southern New Zealand
The Oligocene Balleny Group of Chalky Island, southwestern Fiordland, comprises a typical continental margin sequence 900 m in thickness. Thin nearshore traction deposited sediments at the base are overlain by submarine canyon and fan lithofacies that were deposited by the full range of subaqueous mass-transport processes. A steep-walled channel within Balleny Group is interpreted as a fossil p...
متن کاملMethod of Video-Measurements of Traffic Flow Characteristics at a Road Junction
In the theory of traffic flows the main characteristics are: intensity, speed, and density. They make it possible to use hydrodynamic models. In connection with the development of modern highways and road networks, traffic flows behavior is becoming more and more complex and diverse. In particular, the B.Kerner studies have shown that the laminar solution of hydrodynamic models is poorly corre...
متن کاملبررسی اثر ساختمان خاک بر منحنی رخنه بروماید در شرایط رطوبتی اشباع و غیراشباع
In this study, the effect of soil structure under saturated and unsaturated flow conditions on nonreactive bromide (BR) transport was investigated. The soil structure treatments consisted of undisturbed columns (prismatic and granular structures), and disturbed columns (single- grain structure). A constant concentration (C0= 0.005 M) of bromide was supplied on the surface of the columns in a st...
متن کاملWater Management in the Cathode Side of a PEM Fuel Cell
A one dimensional isothermal mathematical modeling of cathode side of a Proton Exchange Membrane (PEM) fuel cell is developed for the water management problem. Water transport is investigated in both cathode Gas Diffusion Layer (GDL) and membrane through solving appropriate equations for fluid flow and mass transport in GDL and water transport within the membrane. The gaseous mixture flowing in...
متن کاملکاربرد مدلسازی عددی سهبعدی در شبیهسازی پدیدههای پیچیده مهندسی رودخانه
Most of river engineering problems are complicated and need to be analyzed by three dimensional models of flow and sediment transport. Considering the fact that computers and numerical methods with great ability of flow and sediment transport simulation are developing quickly, using numerical modeling by engineers is inevitable. Nevertheless, before application, numerical models need to be veri...
متن کامل