Bifurcation analysis in hunting dynamical behavior in a railway bogie: Using novel exact equivalent functions for discontinuous nonlinearities
نویسندگان
چکیده
Hunting; Rail wheelset; Hopf bifurcation; Discontinuous nonlinearity; Routh–Hurwitz criterion; Equivalent function; Analytical approach. Abstract This paper presents an investigation on bifurcation of railway bogie behavior in the presence of nonlinearities which are yaw damping forces in longitudinal suspension system and the friction creepage model of thewheel/rail contact including clearance. Through Routh–Hurwitz stability criterion and amore accurate model than Yang and Ahmadian, the analytical expression of critical speed is achieved as well as the limit cycle frequency. Then, by Averaging method and analytical critical speed, the amplitude of the limit cycle is determined while the wheel/rail clearance is taken into account. To solve the nonlinear equations analytically, both dead zone discontinuity and yaw dampers must be formulated properly. In this direction, a suitable and novel exact equivalent functions (EF) is introduced. Furthermore, 2D and 3D bifurcation diagrams are depicted to show themechanism creation of Hopf bifurcationwhich is employed in the design of stable wheelset systems. Finally, the accuracy of one-axle model results for the prediction of critical speed is evaluated in contrast with two-axle bogie model. © 2012 Sharif University of Technology. Production and hosting by Elsevier B.V. All rights reserved.
منابع مشابه
Effects of the Bogie and Body Inertia on the Nonlinear Wheel-set Hunting Recognized by the Hopf Bifurcation Theory
Nonlinear hunting speeds of railway vehicles running on a tangent track are analytically obtained using Hopf bifurcation theory in this paper. The railway vehicle model consists of nonlinear primary yaw dampers, nonlinear flange contact stiffness as well as the clearance between the wheel flange and rail tread. Linear and nonlinear critical speeds are obtained using Bogoliubov method. A compreh...
متن کاملEffects of the longitudinal and lateral axlebox clearance on hunting, curving and wear behavior of the three piece bogies
Three piece bogies are widely in use by the freight railway services throughout the world. In comparison with the other freight bogies they cost less and are easier to maintain. However, they do not exhibit favorable curving behavior. Amongst the methods to improve the bogie performance is the proposal to introduce lateral clearance in the bogies’ axleboxs. In the case of the three piece bogies...
متن کاملLateral Stability Analysis of High-Speed Railway Vehicle on Curve
A vehicle body, two bogie frames and two wheelsets for each bogie frame are used to describe the railway vehicle model. The system dynamic is modeled using a 38-DOF system including the longitudinal, lateral, vertical, roll, pitch and yaw displacements. A heuristic nonlinear creep model and the elastic rail are used to simulate the wheel-rail contact. Stable movement and the corresponding limit...
متن کاملBifurcation Analysis of High-Speed Railway Vehicle in a Curve
In order to prevent unpleasant incidents, preservation high-speed railway vehicle stability has vital importance. For this purpose, railway vehicle is modeled using a 38-DOF. This paper presents an investigation on limit cycle and bifurcation of high speed railway behavior. It is revealed that the critical hunting speed decreases by increasing the wheel conicity. Also the critical hunting speed...
متن کاملAnalysis of Semi-Bogie Based Propulsion System Used in Tehran Metro's trains in Degraded Mode of Operation
During the supply process of rolling stocks for metro systems, the propulsion system of trains in terms of separate power and control scheme should be selected based on the Reliability, availability, maintainability, and safety (RAMS) parameters along with some expected indexes in operation plan. This means that, in addition to undeniable control and operation advantages of a train that are equ...
متن کامل