High Power Model Fabrication of Biperiodic L-support Disk-and-washer Structure
نویسنده
چکیده
The high power test model of biperiodic L-support diskand-washer was fabricated. Among some trouble in the fabrication, the main one was a vacuum leak in a brazing process. The repair test of the leak showed a good result; four units were recovered out of five leak units (recover rate 80%). While an accelerating mode frequency was tuned at an operating frequency of 2857 MHz by squeezing method, a coupling mode frequency of 2847MHz and the 3.4% field flatness (peak to peak ratio) were achieved.
منابع مشابه
Determinant density and biperiodic alternating links
Let L be any infinite biperiodic alternating link. We show that for any sequence of finite links that Følner converges almost everywhere to L, their determinant densities converge to the Mahler measure of the 2–variable characteristic polynomial of the toroidal dimer model on an associated biperiodic graph.
متن کاملA High-power L-band Rf Window*
This paper discusses the design, fabrication and testing of a high power alumina disk window in WR1500 waveguide at L Band, suitable for use in the NLC damping ring RF cavities at 714 MHz and the LEDA Accelerator at 700 MHz. The design is based on the fabrication methods used for the successful PEP-II cavity windows. Four prototype windows at 700 MHz have been produced by LBNL for testing at LA...
متن کاملDesign and Fabrication of Ultralight High-Voltage Power Circuits for Flapping-Wing Robotic Insects
Flapping-wing robotic insects are small, highly maneuverable flying robots inspired by biologicalinsects and useful for a wide range of tasks, including exploration, environmental monitoring, searchand rescue, and surveillance. Recently, robotic insects driven by piezoelectric actuators have achievedthe important goal of taking off with external power; however, fully autonomous operation requir...
متن کاملHybrid Z-Source DC-DC Converter with ZVZCS and Power Transformer Resetting: Design, Modeling, and Fabrication
This paper introduces a novel two transistors forward topology employing a z-source to achieve ZVZCS and power transformer resetting for various applications. Comparing with the forward converter, this topology has the advantage of displaying ZCS condition with an added Z-Source and no additional switches when the switches turn on, and that ZVS condition happens when the switches turn off. Duty...
متن کاملDevelopment and Improvement of a Washer - Dryer with Kansei Ergonomics
Recently, washer-dryer machines with slanted drums have become popular in Japan. We measured and analyzed posture while using such machines with three-dimensional motion capture measuring devices. Subjective Kansei and usability questionnaires were also used. After the measurements, working postures were analyzed with a human kinematic model (3D SSPP). Three types of machines were used for the ...
متن کامل