EVALUATION OF THE SHEAR BOND STRENGTH OF THE UNION BETWEEN TWO CoCr-ALLOYS AND A DENTAL CERAMIC AVALIAÇÃO DA RESISTÊNCIA AO CISALHAMENTO DA UNIÃO ENTRE DUAS LIGAS A BASE DE CoCr E UMA CERÂMICA
نویسندگان
چکیده
1Graduate Student, Department of Dental Materials and Prosthodontics, São José dos Campos Dental School, UNESP, São José dos Campos, São Paulo, Brazil. 2DDS, MSc, PhD Student, Department of Dental Materials and Prosthodontics, São José dos Campos Dental School, UNESP, São José dos Campos, São Paulo, Brazil. 3DDS, MS, PhD, Associate Professor, Department of Dental Materials and Prosthodontics, São José dos Campos Dental School, UNESP, São José dos Campos, São Paulo, Brazil.
منابع مشابه
Influence of thermal and mechanical fatigue on the shear bond strength of different all-ceramic systems
BACKGROUND To evaluate the influence of thermal and mechanical fatigue on the shear bond strength of different all-ceramic cores and veneering porcelain interfaces. MATERIAL AND METHODS All-ceramic systems tested were lithium disilicate and zirconia veneered by layering technique. Sixty specimens (n=20) were subjected to shear bond strength. Ten of them were thermal and mechanical cycled. Fra...
متن کاملبررسی مقایسهای استحکام کششی باند فلز- پرسلن در دو آلیاژ بیسمتال
Statement of Problem: One of the greatest problems in metal –ceramic restorations is debonding of porcelain from dental alloys. Production of dental alloys by Iranian companies necessitates the evaluation of physical and handling properties of these products. Purpose: In this study the bond strength between porcelain and two types of base metal alloys, Supercast (with beryllium) and Minalux (wi...
متن کاملInfluence of low concentration acid treatment on lithium disilicate core/veneer ceramic bond strength
OBJECTIVE This study evaluated the influence of low concentration acid treatment on the shear bond strength between lithium disilicate (LD) infrastructure and veneering porcelain. The surface morphology characteristic after this acid treatment was also examined. STUDY DESIGN LD reinforced ceramic cylinders (n=10) (IPS e.max Press, Ivoclar-Vivadent, Schaan, Liechtenstein) were treated (LD-trea...
متن کاملShear bond strength of dental porcelains to nickel-chromium alloys.
The continuous technological advance and increasing availability of new base metal alloys and ceramic systems in the market, coupled to the demands of daily clinical practice, have made the constant evaluation of the bond strength of metal/porcelain combinations necessary. This study evaluated the metal/porcelain shear bond strength of three ceramic systems (Duceram, Williams and Noritake) in c...
متن کاملEvaluation of Soldered Joints of Two Base Metal Ceramic Alloys: Supercast and Minalux
Background: Different soldering techniques have a variety of applications in dentistry. One of the most important uses of soldering is to join multiple-unit fixed partial dentures together. In this Study, two base metal alloys (Supercast and Minalux) were soldered and their tensile, compressive and flexural strengths were measured and compared to each other. Materials and methods: In this ...
متن کامل