Flexible Temperature Sensor Array Based on a Graphite-Polydimethylsiloxane Composite
نویسندگان
چکیده
This paper presents a novel method to fabricate temperature sensor arrays by dispensing a graphite-polydimethylsiloxane composite on flexible polyimide films. The fabricated temperature sensor array has 64 sensing cells in a 4×4 cm2 area. The sensor array can be used as humanoid artificial skin for sensation system of robots. Interdigitated copper electrodes were patterned on the flexible polyimide substrate for determining the resistivity change of the composites subjected to ambient temperature variations. Polydimethylsiloxane was used as the matrix. Composites of different graphite volume fractions for large dynamic range from 30 °C to 110 °C have been investigated. Our experiments showed that graphite powder provided the composite high temperature sensitivity. The fabricated temperature sensor array has been tested. The detected temperature contours are in good agreement with the shapes and magnitudes of different heat sources.
منابع مشابه
A Novel Method for Fabricating Wearable, Piezoresistive, and Pressure Sensors Based on Modified-Graphite/Polyurethane Composite Films
A wearable, low-cost, highly repeatable piezoresistive sensor was fabricated by the synthesis of modified-graphite and polyurethane (PU) composites and polydimethylsiloxane (PDMS). Graphite sheets functionalized by using a silane coupling agent (KH550) were distributed in PU/N,N-dimethylformamide (DMF) solution, which were then molded to modified-graphite/PU (MG/PU) composite films. Experimenta...
متن کاملDevelopment of a Disposable Electrochemical Sensor based on Nanocomposite/Ionic Liquid Assisted Hollow Fiber-Graphite Electrode for Measurement of Lorazepam Using Central Composite Design
In this study a new method of preconcentration, separation and efficient measuring of so-called hollow fiber solid / liquid phase microextraction has been introduced for the determination of trace amounts of lorazepam (LRZ) in water samples, urine and hair using differential pulse voltammetry. To this end, a hybrid adsorbent material was used that involved ionic liquid assisted magnetic multi-w...
متن کاملIntegrated and Flexible High Temperature Ultrasonic Transducers
Thick (> 40μm) ceramic films as piezoelectric ultrasonic transducers (UTs) have been successfully deposited on metallic and graphite/epoxy composite substrates by a spray technique. The characteristics of these UTs are that they (1) can be integrated directly onto the desired planar or curved substrates; (2) may not need couplant; (3) can operate in the transmission and pulse/echo modes with a ...
متن کاملFlexible Graphite-on-Paper Piezoresistive Sensors
We demonstrate novel graphite-on-paper piezoresistive devices. The graphite was used as sensing component. The fabrication process can be finished in a short time with simple tools (e.g., a scissor and a pencil). A small array of six paper-based piezoresistive devices is made. The whole device is flexible. The test results showed that the change of resistance was proportional to the applied for...
متن کاملFormulation of Composite Resistive Pastes for Fabrication of Micro- Heaters
We investigate in this work the formulation of composite resistive pastes based on epoxy resins and graphite for micro-heater manufacturing via thick-film technology. These resistive pastes are designed for screenprinting onto a printed circuit board (PCB) substrate; further coating with expandable polydimethylsiloxane (PDMS), a composite based on an elastomeric matrix and expandable microspher...
متن کامل