Shock Wave Structure in Particulate Composites
نویسندگان
چکیده
An experimental study of shock wave profiles in particulate composites of various compositions is undertaken to determine how shock width and rise times depend on the mean particulate size. The composites under examination serve as a model for concrete or polymer bonded explosives, based upon the impedance mismatch between the relatively stiff particulates and compliant matrix. Polymethyl Methacrylate (PMMA) and glass spheres ranging in size from 100μm to 1000μm are used in concentrations of 30% and 40% glass by volume for experiments with a single bead size, and up to 50% glass by volume for multi-mode particle size distributions. A linear change in shock wave rise time is observed as a function of mean particulate diameter. © 2015 Published by Elsevier Ltd. Selection and/or peer-review under responsibility of the Hypervelocity Impact Society.
منابع مشابه
The effect of heterogeneity on plane wave propagation through layered composites
When laminated composites are subjected to impact loading, the material response is critically determined by the interactions of multiple waves generated at the laminate interfaces. Due to the high complexity arising from the architectural details of composites, layered heterogeneous materials have been studied as the model system to understand the impact behavior of engineering composites. Pre...
متن کاملEffect of Aging on Fracture Toughness of Al6061-Graphite Particulate Composites
This article presents the investigative work conducted on the fracture toughness and microstructure of Al6061-9% graphite particulate composites. The requisite specimens for the fracture toughness testing were compact tension ones prepared using stir casting technique. The Al6061-9% graphite particulate metal matrix composite has been heat treated in the underaged condition. It is observed from...
متن کاملAn Optical Measurement System to Measure Velocity and Provide Shock Wave Pressure Diagrams
This paper introduces an optical measurement system for shock wave characteristics. The system works by mountinga metal plate attached to spring mounts against the shock wavefront. This set is sealed and can plot the shock wave pressure diagram by measuring plate's displacement, radiation and changing the reflection of light during shock wave conflict, and converting these optical data to volta...
متن کاملMicrostructure Characterization and Mechanical Properties of Al-SiCp Composites
In recent years the aluminum matrix composites are gaining wide spread applications in automotive, aerospace, defense, sport and other industries. The reason for this is their exciting properties like high specific strength, stiffness, hardness, wear resistance, dimensional stability and designer flexibility. The present work reports on mechanical properties and microstructure analysis of Al-Si...
متن کاملOscillation Control of Aircraft Shock Absorber Subsystem Using Intelligent Active Performance and Optimized Classical Techniques Under Sine Wave Runway Excitation (TECHNICAL NOTE)
This paper describes third aircraft model with 2 degrees of freedom. The aim of this study is to develop a mathematical model for investigation of adoptable landing gear vibration behavior and to design Proportional Integration Derivative (PID) classical techniques for control of active hydraulic nonlinear actuator. The parameters of controller and suspension system are adjusted according to be...
متن کامل