A Dual-band Rf Energy Harvesting Using Frequency Limited Dual-band Impedance Matching
نویسندگان
چکیده
Abstract—In this paper, a novel dual-band RF-harvesting RF-DC converter with a frequency limited impedance matching network (M/N) is proposed. The proposed RF-DC converter consists of a dual-band impedance matching network, a rectifier circuit with villard structure, a wideband harmonic suppression low-pass filter (LPF), and a termination load. The proposed dual-band M/N can match two receiving band signals and suppress the out-of-band signals effectively, so the back-scattered nonlinear frequency components from the nonlinear rectifying diodes to the antenna can be blocked. The fabricated circuit provides the maximum RF-DC conversion efficiency of 73.76% and output voltage 7.09 V at 881MHz and 69.05% with 6.86V at 2.4GHz with an individual input signal power of 22 dBm. Moreover, the conversion efficiency of 77.13% and output voltage of 7.25V are obtained when two RF waves with input dual-band signal power of 22 dBm are fed simultaneously.
منابع مشابه
A dual-band RF energy harvesting circuit using 4th order dual-band matching network
A novel compact rectifier for dual-band operation in the RF energy harvesting is presented. The circuit comprises a 4th order dual-band impedance matching and a single-series circuit with one double diode, both are integrating into a compact shape to occupy a small area of 30 × 35 mm. The merit of the proposed rectifier circuit is that it can be extended to n number of the frequency band by usi...
متن کاملUwb - Uhf Rfid T Ag on P Aper for S Imultaneous
This paper presents the design of a compact integrated UWB-UHF RFID solution enabling simultaneous wireless data and power transfer. The described integrated dual-band antenna is designed to cover the lower European UWB 3.1 to 4.8 GHz band for communication and localization functions and the European UHF RFID 868 MHz band for RF Energy Harvesting. Simultaneous operations are guaranteed by means...
متن کاملDesign and Implementation of Microstrip Antenna for RF Energy Harvesting
This paper describes the antenna design for RF power harvesting system. The design goes through three phases designing of antenna, matching network and rectifier. A dual band Microstrip antenna suspended above ground plane is designed to operate in GSM 1.8 and ISM 2.4 GHz bands. The antenna incorporates the capacitive feed strip which is fed by coaxial probe technique where the inductive impeda...
متن کاملDesign, Simulation and implementation of active dual-band dipole antenna using a series stub
In this paper, a new method for designing an active dual-band dipole antenna is proposed. The operating frequencies of the proposed antenna are 150 and 450 MHz that are usually used in military applications. Using a series stub is the main idea in the proposed dual-band antenna, where it makes an independent resonance frequency higher than the main resonance frequency of a conventional dipole. ...
متن کاملResonant Circuit Topology for Radio Frequency Energy Harvesting
Title of thesis: RESONANT CIRCUIT TOPOLOGY FOR RADIO FREQUENCY ENERGY HARVESTING Negin Shahshahan, Master of Science, 2012 Directed by: Professor Neil Goldsman Department of Electrical and Computer Engineering In this work the operation of a MOSFET based rectifier, composed of multiple stages of voltage doubler circuits used for radio frequency (RF) energy harvesting, is investigated. Analytica...
متن کامل