Superconvergent eigenvalue bending plate element
نویسندگان
چکیده
منابع مشابه
Modified Specht ’ S Plate Bending Element and Its Convergence Analysis
This paper discusses Specht’s plate bending element, shows the relationships between ∫ Fρ w ds or ∫ Fρ ∂w ∂n ds and the nodal parameters (or degrees of freedom), further it sheds lights on the construction methods for that element, and finally it introduces a new plate bending element with good convergent properties (which passes the F-E-M-Test (cf.[11])) is derived.
متن کاملA New Eight Nodes Brick Finite Element Based on the Strain Approach
In this paper, a new three dimensional brick finite element based on the strain approach is presented with the purpose of identifying the most effective to analyze linear thick and thin plate bending problems. The developed element which has the three essential external degrees of freedom (U, V and W) at each of the eight corner nodes, is used with a modified elasticity matrix in order to satis...
متن کاملAnalysis of Natural Frequencies for a Laminated Composite Plate with Piezoelectric Patches using the First and Second Eigenvalue Derivatives
In this paper, the first and second order approximations of Taylor expansion are used for calculating the change of each natural frequency by modifying an arbitrary parameter of a system with a known amount and based on this approximation, the inverse eigenvalue problem is transformed to a solvable algebraic equation. The finite element formulation, based on the classical laminated plate theory...
متن کاملAnalytical and Numerical Investigation of Four-roll Bending
Four-roll bending process is usually used for manufacturing of seamed thick-walled and thin-walled cylinders. Due to complexity of this process, the analytical solution of plate bending in this process has not been developed completely. The existence of friction and multi-step processing makes it more difficult. Investigation of four-roll bending process using analytical and numerical methods i...
متن کاملA fast multipole boundary element method for solving the thin plate bending problem
A fast multipole boundary element method (BEM) for solving large-scale thin plate bending problems is presented in this paper. The method is based on the Kirchhoff thin plate bending theory and the biharmonic equation governing the deflection of the plate. First, the direct boundary integral equations and the conventional BEM for thin plate bending problems are reviewed. Second, the complex not...
متن کامل