Analysis of the Rate-Dependent Coupled Thermo- Mechanical Response of Shape Memory Alloy Bars and Wires in Tension

In this paper, the coupled thermo-mechanical response of shape memory alloy (SMA) bars and wires in tension is studied. By using the Gibbs free energy as the thermodynamic potential and choosing appropriate internal state variables, a three-dimensional phenomenological macroscopic constitutive model for polycrystalline SMAs is derived. Taking into account the effect of generated (absorbed) latent heat during the forward (inverse) martensitic phase transformation, the local form of the first law of thermodynamics is used to obtain the energy balance relation. The three-dimensional coupled relations for the energy balance in the presence of the internal heat flux and the constitutive equations are reduced to a one-dimensional problem. An explicit finite difference scheme is used to discretize the governing initial-boundary-value problem of bars and wires with circular cross sections in tension. Considering several case studies for SMA wires and bars with different diameters, the effect of loading-unloading rate and different boundary conditions imposed by free and forced convections at the surface are studied. It is shown that the accuracy of assuming adiabatic or isothermal conditions in the tensile response of SMA bars strongly depends on the size and the ambient condition in addition to the rate-dependency that has been known in the literature. The data of three experimental tests are used for validating the numerical results of the present formulation in predicting the stress-strain and temperature distribution for SMA bars and wires subjected to axial loading-unloading.