Electrodeposited Organic Layers Formed from Aryl Diazonium Salts for Inhibition of Copper Corrosion
نویسندگان
چکیده
Copper substrates deposed on a gold screen-printed electrode were covered with different aryl diazonium salts by electrodeposition at 0.25 mA for 30 or 300 s. Seven compounds were investigated: 4-aminophenylacetic acid, 4-aminophenethyl alcohol, 4-fluoroaniline, 4-(heptadecafluorooctyl)aniline, 4-aminoantipyrine, 4-(4-aminophenyl)butyric acid and 3,4,5-trimethoxyaniline. Quantitative monitoring of the electrodeposition process was carried out by electrogravimetry using quartz crystal microbalance (QCM). The electrodeposited mass varies between 26 ng/cm² for 4-fluoroaniline formed during 30 s to 442 ng/cm² for 4-phenylbutyric acid formed during 300 s. The corrosion inhibition properties of aryl-modified layers have been studied in buffer citrate with pH = 3 or 3.5% NaCl solutions using electrochemical noise (ECN) and Tafel potentiodynamic polarization measurements. A corrosion inhibiting efficiency up to 90% was found. The highest corrosion inhibition was obtained for 4-(4-aminophenyl)butyric acid and the lowest for 4-fluoroaniline. A relation between the inhibition efficiency and the chemical nature of the substituents in the protective layer was found.
منابع مشابه
Photocatalytic Arylation of Alkenes, Alkynes and Enones with Diazonium Salts
Carbon–carbon bond formation by sp–sp or sp–sp crosscoupling is a key transformation in organic synthesis. Many methods, typically involving transition metal catalysis, are known, and the recent recognition of Richard F. Heck, Ei-ichi Negishi and Akira Suzuki by the Royal Swedish Academy of Sciences (Stockholm, Sweden) when they were awarded the Nobel Prize in Chemistry (2010) underlines the im...
متن کاملThèse de doctorat de l ’ École Polytechnique
In this work, three surface functionalization processes have been studied: the spontaneous grafting fromdiazonium salts, the chemically induced grafting from diazonium salts and the chemically induced graftingfrom diazonium salts in presence of vinylic monomers (which is Graftfast). These processes work at roomtemperature, atmospheric pressure, in aqueous medium and without any ext...
متن کاملA transition-metal-free synthesis of arylcarboxyamides from aryl diazonium salts and isocyanides.
A transition-metal-free carboxyamidation process, using aryl diazonium tetrafluoroborates and isocyanides under mild conditions, has been developed. This novel conversion was initiated by a base and solvent induced aryl radical, followed by radical addition to isocyanide and single electron transfer (SET) oxidation, affording the corresponding arylcarboxyamide upon hydration of the nitrilium in...
متن کاملClick chemistry from organic halides, diazonium salts and anilines in water catalysed by copper nanoparticles on activated carbon.
An easy-to-prepare, reusable and versatile catalyst consisting of oxidised copper nanoparticles on activated carbon has been fully characterised and found to effectively promote the multicomponent synthesis of 1,2,3-triazoles from organic halides, diazonium salts, and aromatic amines in water at a low copper loading.
متن کاملEnhanced copper surface protection in aqueous solutions containing short-chain alkanoic acid potassium salts.
The ability of dissolved potassium monocarboxylate salts to produce surface passivation and to inhibit aqueous corrosion of copper was studied. The electrochemical measurements indicate that the inhibiting efficiency of these compounds, with a general formula Cn-1H2n-1COOK or CnK (n=3...12), is dependent on the hydrocarbon chain length. The inhibiting efficiency was higher for a longer hydrocar...
متن کامل