Design of Low Power Folding And Interpolating ADC
نویسندگان
چکیده
Analog to Digital converter plays an important role as the interface between analog and digital signal processing. The performance of ADC is improved by power consumption of comparator (nearly 60% of power) used in ADC circuit. In such application which requires low power consumption and high speed and high resolution, one of the most prevalently used ADC architectures is the Folding and Interpolating (F/I) ADC. Keywords— Folding circuit by folding factor 4 and 8, comparator, resistive ladder, latch, encoder, zero crossing detector
منابع مشابه
Low Power Coarse Converter for Folding & Interpolating ADC using 0.18μM Technology
Folding and interpolating A/D converters have been shown to be an effective means of digitization of high bandwidth signals at intermediate resolution. The paper focuses on design of low power 3-bit coarse converter for folding and interpolating ADC. The folding amplifier can be used to produce more than one zero-crossing point to reduce required number of comparators. The coarse converter is d...
متن کاملDeep-Submicron CMOS Design Methodology for High-Performance Low-Power Analog-to-Digital Converters
In this paper, we present a complete design methodology for high-performance low-power Analog-to-Digital Converters in deep submicron CMOS. This methodology is demonstrated on two ADC architectures, Flash and Folding&Interpolating(F&I). The designs were implemented in 0.18μm CMOS technology, achieving a high conversion rate of 2.6 GSamples/s for the Flash converter, and a 1 GSample/s rate for t...
متن کاملNanowatt Range Folding-Interpolating ADC Using Subthreshold Source-Coupled Circuits
A very low power mixed-signal design methodology based on subthreshold sourcecoupled circuits is presented, and a nano-Watt range analog-to-digital converter (ADC) circuit based on folding-interpolating topology is proposed as a complete design example. To reduce the power dissipation to sub-μW level, subthreshold source-coupled circuit family has been developed for both analog and digital part...
متن کاملA Wide Input Bandwidth 7-bit 300-MSample/s Folding and Current-Mode Interpolating ADC
A 7-bit Nyquist folding and interpolating analog-to-digital converter (ADC) that converts at 300 MSamples/s is presented. Using current-mode signal processing techniques for analog preprocessing and a front-end sample-and-hold, the proposed 7-bit folding and interpolating ADC yields a wide input bandwidth up to 60 MHz with six effective number of bits. The ADC consumes 200 mW from a 3.3-V power...
متن کاملSurvey on High speed folding and interpolation ADC in CMOS technology
Folding and interpolation ADC has been shown to be an important means of digitization of high BW signals at intermediate resolution. The objective of this paper is to design and identify the performance of the ADC. Flash ADC is one of the faster ways to convert any analog signal to a digital signal. It uses folding and interpolating techniques allow each comparator of the ADC to be reused sever...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2014